[ China Wardrobe ] For unprofessional consumers, the installation of panels and accessories for the whole wardrobe is a matter of learning, and the back panel as a support for the overall wardrobe is not exposed to people's eyes, but the overall wardrobe back panel How much thickness is better? This is a problem that many consumers care about. Let's discuss the thickness of the overall wardrobe backboard together with Xiaobian.
Which board is the back panel of the whole wardrobe?
Under normal circumstances, the whole wardrobe is installed in the living room, which is standing against the wall. The largest contact area between the wardrobe and the wall is the back panel of the whole wardrobe . The whole wardrobe is made up of different panels, and the back panel is a single board directly nailed to the two side panels.
Wardrobe back
What is the role of the overall wardrobe back panel?
Every year, there is a “back to the south†in the south. The air is damp. If the indoor wardrobe does not have a backboard, the clothes and bedding stored in the closet are prone to moisture and mildew, causing the clothes to smell and even damage the clothes. The overall wardrobe back panel does not affect the wardrobe. The back panel is generally not load-bearing, mainly dust-proof, moisture-proof and stable .
The thickness of the overall wardrobe backboard is commonly used in three thicknesses: 5MM, 9MM, and 18MM. The thickness of the back panel is analyzed from the gaps, moisture, and stability of the back panel.
1, 5MM thickness
Gap: Use a 5mm overall wardrobe back panel to leave a lot of space, which is why many consumers or businesses choose 5mm backplane. However, the thickness of the 5mm backing plate is always too thin. Whether it is the slotting of the back panel of the wardrobe or the stability of the overall product, the 5mm backboard cannot fully exert the performance of the wardrobe.
Moisture-proof: The 5mm-thick wardrobe backboard can basically meet the moisture-proof performance. Although the moisture will not be directly immersed, if it encounters a long period of severe rainy season, it will still cause certain damage to the moisture resistance of the board. Many consumers will choose a 9mm wardrobe back panel.
Stable: 5mm wardrobe back panel stability, if it is a large wardrobe, the length is between 1000mm-2000mm, for the stability, the backboard is less stressed and less likely to be deformed. If the length of the wardrobe is greater than 2000mm, the corresponding force of the backboard is too large, and the 5mm backboard is more easily deformed, and the backing is more likely to break.
2, 9MM thickness
Gap: 9mm back plate is the common thickness size of custom closet, because in the gap processing, the thickness of 9mm back plate is more suitable for slotting, and the effect of leaving the gap with the wall is very good, and the wardrobe space occupied by the backboard It will not be very large, which will help to leave a gap between the backboard and the wall to make the moisture resistance better.
Moisture-proof: The overall wardrobe back panel with a thickness of 9mm can be used for moisture-proof work in the space of the saved space, so that the backboard is more secure, and the gap is properly reserved. The appropriate moisture-proof cotton can be added in the middle. The wardrobe back panel is more resistant to moisture.
Stable: The load-bearing weight of the 9mm-thick wardrobe backboard is sufficient to support the gravity of the top cabinet and each laminate. It not only ensures the stability of the wardrobe, but also reserves more space for the wardrobe to not protrude and does not cause the wardrobe. The use area is smaller, and the like, and it is more suitable for the overall wardrobe with a larger width, and the effect is further exerted, so that the entire wardrobe becomes extremely strong.
3, 18MM thickness
Gap: The thickness of the 18mm overall wardrobe back panel is more limited than the effect of 5mm and 9mm thickness. Because the 18mm wardrobe backplane takes up a lot of space, it will cause the original space to occupy or stand out. If other moisture-proof methods are used, such as adding moisture-proof cotton on the backboard and brushing the moisture-proof paint on the wall, although the space occupation will be reduced a little, it will cause the overall layout volume of the wardrobe, and the depth of the wardrobe will be reduced.
Moisture-proof: In terms of moisture resistance, the 18mm wardrobe back panel is not superior to other thicknesses due to its increased thickness. Because moisture is slowly invaded by moisture, not directly in the water.
Stable: The 18mm-thick wardrobe back panel is the strongest in weight and stability. Even if the weight is added above, the wardrobe back panel will not be deformed, and the connection between the hardware components is relatively stable, which makes the overall wardrobe look even more Stable and thick, it makes people feel more secure.
Through the above analysis and comparison, the overall wardrobe back panel of 9mm thickness can achieve perfect effect in terms of moisture resistance and stability.
ningbo haonuo hardware factory , https://www.haonuocrafts.com