The hanging sliding door is not affixed by the pre-installed track box, and the exposed track box and the brick intersection are not handled well, which brings certain difficulties to the construction. Because the track is under a certain pressure, the brick is also stressed. For a long time, it is easy to cause the brick to crack near the track. In addition, if it is in a space such as a kitchen and bathroom, it is easy to hide dirt and dirt on the rail box, and soot and dust on it, which causes troubles for cleaning.
The size of the track box on the upper part of the sliding door is guaranteed to be 12 cm high and 9 cm wide. A track is installed in the track box to suspend the sliding door on the track. Most doors or door openings today have a height of 1.95 to 2.15 meters. Experience has shown that when the height of the door is less than 1.95 meters, no matter how tall the person is, it will feel very depressed and uncomfortable. Therefore, when doing the sliding door, the height should be at least 195+12=207 cm. If there is enough space for the track box, the sliding door can be considered. Otherwise, it can only be an external suspension, that is, the track box is exposed outside, which is certainly not beautiful, and the gap between the door and the wall will become larger after a long time.
The width of the sliding door is exquisite. The gold size of the normal door is about 80 cm x 200 cm. Under this structure, the door is relatively stable. If there is a height higher than 200 cm, or even higher, the sliding door should be narrowed or the sliding door should be narrowed to keep the door stable and safe. Sex.
Use the sliding door from the floor to the top with caution. Since the swing amplitude is too large when pushing and pulling, the sliding door is easily deformed after a long time, and the door cannot be opened after the deformation, which means that it cannot be repaired and cannot be used.
Since the sliding door is in contact with the wall or the sides of the cabinet, there is no other object in the contact position to block the closing of the sliding door. For example, the position of the drawer in the cabinet should avoid the intersection of the sliding door and be at least 25px higher than the bottom plate; the drawer in the folding cabinet should be at least 375px from the side wall. Pay special attention to the power switch and socket on the wall. The sliding door should be closed and the position of the switch and socket should be changed.
Regardless of the floor on which you make any material, you must ensure that the walls of the door are horizontal and vertical. Otherwise, the door will be skewed after the installation is completed. The adjustable error is no more than 10mm.
Do not install the corner line in the installation position. The plaster line can be installed on the sealing plate above the wall cabinet. If the door is directly to the top, do not install the plaster line.
A carpet of less than 5 mm thickness will be cut off from the carpet at the location and directly attached to the lower rail. For carpets with a thickness of 5 mm or more, if the double rails are installed, they can be directly screwed to the carpet: if the monorail is installed, the carpet at the location must be cut off, and the 3-5 mm thick wooden strips should be placed in advance to paste the monorail directly. Above. Door industry vision, your friend!
Document.body.oncopy = function () { setTimeout( function () { var text = clipboardData.getData("text"); if (text) { text = text + " This article comes from China Wooden Door Network, China's well-known wooden door industry portal Website! (http://) Detailed reference: "+location.href; clipboardData.setData("text", text); } }, 100) }In Sink Dish Rack,Dish Drying For Kitchen,Round Dish Drainer,Metal Dish Drainer
Jiangmen Xinhui Siqian Xiangyi Metalwork Factory , https://www.xydryingrack.com