For home improvement, many owners are ignorant. Most of the owners buy the plates and go back to the furniture to listen to the advice of the carpenter to buy a certain amount of plates, but even so, many renovated owners must know that there will be problems such as material remaining and scrap processing. The editor of the top ten brands of Chinese plate art, the artisan editor, wants to say that in fact, we can save the plate from the parts specifications, thickness and structure of the plate.
Component specifications:
The specifications of the wood-based panels are basically in British sizes (1220mm × 2440mm, 1220mm × 1830mm), and the panel furniture is made of wood-based panels. Therefore, if the specifications of the components are determined to be 392, 595, 195, etc. Suitable size will increase the utilization of the board and reduce waste.
In addition, after making the specifications of the parts conform to the specifications of the raw materials, it is necessary to consider whether the size can be further reduced. For example, a drawer side panel, the width of which is set to 1150mm, the width of the raw material sheet is generally 1220 mm, which is very advantageous for increasing the yield.
Component thickness:
There are many habits in the production of furniture, and these habits are good or bad. For example, furniture in the north often has heavy habits, and often uses thick plates and large plates habitually. The use of materials is disadvantageous in some cases. For example, the side panels of drawers, we often use 16mm, 18mm thick plates; but many manufacturers in the South, 12mm thick plates have been widely used in high-end furniture.
Practice has proved that this size has withstood the test in terms of shape and strength. By extension, some small laminates, partitions, and even side panels, top panels (such as bedside cabinets) can be used with 12mm thin plates.
The structure of the part:
Many components, such as side panels, partitions, need to be thicker for the purpose of styling, and then can not be used for material saving, but we can use the cladding structure, also known as the "hollow structure", that is, The wooden frame is made of wood and then covered with plywood, which saves material and reduces the weight of the parts.
This has been developed to be more mature and widely used, but some weight-bearing components, such as desk tops, should not be used.
The structure of the furniture:
Furniture must have a solid structure, which is often said to be "sturdy". Some furniture can still meet the "sturdy" requirements after saving some parts. Looking at many of the most commonly used products in the past, you can find many parts that can be omitted. This savings is often huge and often overlooked. In addition, it is necessary to break through the conventional frame and design some novel, novel, and simple structure products, so that it can get twice the result with half the effort.
Production arrangement:
With the production of furniture, there will be many remaining raw materials that cannot be fully utilized. At this time, it is necessary to design some products suitable for the size of these raw materials, making some small furniture, often because of the strong randomness and creativity of these furniture, but it is very popular.
Outdated materials:
Some old materials with outdated colors and patterns should not be accumulated for a long time. They can make full use of the furniture parts that are not visible, such as the bottom plate and the partitions in the cabinet. It is not necessary to insist on the color and pattern of the outer surface material. It turns out that this method, which does not affect the appearance and does not affect the use, is also popular.
Fine wood craftsman plate healthy addition to providing high-quality products for you, it will also teach you a lot of little knowledge, convenience to bring you and your family! Fine materials, art craftsmen, eco-home!
China's top ten brands plate | plate top ten brands | eco-board top ten brands | fine wood craftsman plate | plate Merchants
China's top ten brand ecological board | wardrobe plate | plate 10 brands | sheet joined | sheet agency
China's top ten brands of fine artisan website:
National Service Hotline: 400-021-8580
Public number: fine artisan   Service number: fine artisan plate
J&TZ CO.,LTD , https://www.inflatable-toy.com