[ Chinese wardrobe net ] In order to store all kinds of living items in the home, I believe that everyone has a lot of cabinets at home, such as wardrobes , bookcases, balcony storage cabinets, console cabinets and cabinets. These cabinets can choose to buy finished cabinets. It can be done by the carpentry site, but now everyone is more willing to hand over to the whole house custom company to get it, then whoever does the cabinet is done, but as for the top, it may be entangled, Xiaobian will come for everyone. Answer, let everyone know when choosing a custom wardrobe.
The advantages of wardrobe to the top
1. Don't worry about the difficulty of cleaning up the top.
2, increased storage space, make full use of the space in the air to replace the season's clothes quilt.
3. Improve the overall texture of the decoration.
Insufficient wardrobe to the top
1, increase the pressure of the side panels, the quality is not easy to deform, can be properly thickened to remedy.
2, poor lighting or relatively small rooms, may create a sense of oppression.
Generally, the height of the rough house in the home is 2.75, and the normal floor is five centimeters. The ceiling or central air conditioner is 2.4. So do a good job, because there is a little bit of dust left on the top, and 2.4 meters will not feel depressed. The furniture factory uses the multi-layer board to be harder. The board is normally 2.4 and will not be deformed.
But here are a few negative textbooks to give you a reference to avoid the same problem.
Gap problem
Customized wardrobes are generally square, but if the quality of the house is flawed, it will generally not be flush with the ground, and there will be such a clear gap.
If the gap is not too large, you can use the putty to repair the flat. However, considering that the cold shrinkage between the wood board and the putty may cause cracks, it is better to consider using the porcelain white glass glue to hit the gap.
Cooperating with the ceiling
If it is a large and obvious gap, there is no way to remedy it with glass glue and putty, you have to use plaster line, PU line or woodwork ceiling to cover.
However, in addition to the whole house customization, a single wardrobe customization may present the following tragedy. Because the decorative lines on the top of the cabinet and the sideline style of the room are different, the final finished product is very ugly. In order to avoid this situation, before the custom wardrobe, we must consider the transition position, choose the same style of decorative edge or do the same style of woodworking ceiling.
The best solution is to do the wardrobe first, and then do the ceiling of this part, whether it is PU, plaster line, woodworking, as long as the two sides of the wardrobe and the ceiling are communicated in advance, the construction is well coordinated, this situation can be completely avoided.
Sheet size problem
The general standard woodworking board is 1220mmX2440mm, which means that if the wardrobe is to be more than 2.4 meters high, it is necessary to build a board, so if it exceeds 2.4m, it is better to plan one more compartment. The wardrobe does not have a side against the wall. It is best to use two 18mm plates to fight together (if you want to be safe, you can add a 12mm plate to the inside), so that you can improve the support of the wardrobe.
Before you make a wardrobe, you should consider the partition. If you exceed 2.4m, you will have a top cabinet. It is better to fully consider the effect of the cooperation with the ceiling.
Grow With Child Chair,Baby Seat,Infant Rocking Chair,Children'S Dining Chair
Zhejiang Lamon Technology Inc. , https://www.baby-chair.com