Children's furniture is mainly made of wood and wood-based panels. Solid wood can be divided into hardwood and softwood, and man-made boards are particle board, medium density board, blockboard (large core board), plywood, composite board and so on. These high-temperature and high-pressure artificial boards are not easily deformed and have been widely used in modern furniture.
Because the wood has a texture, cracking, warping, and deformation will inevitably occur when the temperature and humidity change greatly. No matter what type of wood is used for solid wood furniture, how the workmanship is studied can not avoid these problems. The wood-based panel is to decompose wood into wood chips or wood pulp and re-make the boards. Because the original physical structure of the wood was broken, when the temperature and humidity changed greatly, the "deformation" of the wood-based panel was much smaller than that of the solid wood. Therefore, it can be said that the quality of the artificial board is more stable than that of the solid wood.
Such as curved wooden furniture, is to break the wood into narrow pieces of wood, and then glued and rolled. The curved wood can be bent at any angle and has a good durability. In the kitchen and bathroom furniture, the moisture-proof artificial board is applied, and the detailed sealing and other processes can be used for a long time without deformation.
Furniture made of artificial boards is also called panel furniture. Although the panel furniture is not easily deformed and features various styles, the pollution caused by man-made panels to the living environment cannot be ignored. The State Environmental Protection Administration puts forward environmental protection technical requirements for artificial plates. The issue of free formaldehyde emission from wood-based panel products was jointly drafted by the Institute of Environmental Standards of the Chinese Research Academy of Environmental Sciences and the National Quality Supervision and Inspection Center for Wood-based Panels (Technical Requirements for Environmental Labeling Products of Low-formaldehyde-based Panels). Among them, the scope of pollutant discharge for production enterprises and products is limited, and the discharge of pollutants from enterprises must meet the requirements of national or local pollutant discharge standards. The quality of wood-based panel products should not only meet the requirements of the respective product quality standards, but also stipulate that the content of halogenated hydrocarbons and benzene series used in the products should be less than 2000 mg/kg, and the amount of formaldehyde released from products should be less than 0.2 million. rate. This requirement applies to particleboard, plywood, blockboard, composite board and other man-made boards.
In order to ensure the environmental protection of the living room, consumers should pay attention to whether strict edge sealing is adopted when purchasing panel furniture. At the same time, the six sides of the panel furniture should be well sealed, so it is recommended to buy regular, branded panel furniture.
Children's furniture manufacturers The company's Health Equipment Co., Ltd. mainly produces kindergarten furniture, outdoor children's slides, kindergarten toys, fitness equipment, outdoor development equipment, naughty Fort, etc., is a design, production, sales, after-sales as one of the science and technology enterprises . Website:. Advisory telephone. The company's pleasure and dedication to serve you! Factory address: No. 16, Chuangqiang Road, Lucheng District, Wenzhou City Light Industry Park.
Basic Pet Bed,Dog Bunk Beds,Dog Cot Bed,Dog Crate Bed
Zhejiang Entai Pet Technology Co.,Ltd , https://www.entaipet.com