At present, China's flexographic products are at a very low level, and the printing quality is mainly low, coarse, and simple. Fine multi-color overprinting does not pass the border; at the same time, the application range is small, the main printing text lines and the field, the dot printing is not a lot of. Restricting the application and development of flexo printing in China, in addition to equipment and technical problems, another major reason is that designers do not understand the characteristics of flexo printing technology, resulting in a lack of communication between design and printing, which cannot fully utilize flexo printing. Advantage.
Due to the difference between oriental culture and European and American culture, the design styles of their respective product packaging are obviously different, which has also affected the development of flexo printing in China in the short term. Europe and the United States emphasize that simple color blocks and lines give a strong visual impact. Such products are easy to print with flexo printing. China's packaging industry has long been dominated and influenced by gravure and offset printing, and it has focused more on realism, using a large number of realistic gradation patterns. Therefore, it is difficult for end users to accept flexo printing to pursue the printing effect of offset and gravure. Therefore, the degree of acceptance of flexo printing in China is lower than that of offset printing and gravure printing.
When designing flexographic printing, the following aspects should be avoided:
1. Avoid designing too small text and too thin lines;
2. Avoid two-color or multi-color lines and text overprint;
3. Avoid designing small reverse text and lines;
4. Avoid high-gloss picture disconnection or 1% small outlets;
5. Avoid designing text or lines in Photoshop and other bitmap software;
6. Avoid designing wide and long solid and gradient along the horizontal direction of the printing cylinder;
7. Unless there are special requirements, avoid making large areas on the same page with the dots and small text;
8. Avoid inconsistency in operating software.
Stainless Steel Batter Dispenser
We are manufacturer and supplier of Stainless Steel Batter Dispenser,Pancake Mix Dispenser,Pancake Dropper,Pancake Batter Dispenser,Batter Pourer. And we located in Jiangmen, Guangdong, China. If any interested, please contact us for free.
Batter Dispenser,Pancake Mix Dispenser,Pancake Dropper,Pancake Batter Dispenser,Batter Pourer
Jiangmen Xinhui Zhancha Metal Products Co,. Ltd. , https://www.zchardware.com