Since 2012, the production of furniture and wood panels in the country has continued to improve, and the output growth has steadily increased over the same period of the previous year. From the perspective of growth, the production of wood panels has maintained steady growth, and the expansion of production in the furniture manufacturing industry has declined. At the beginning of 2012, the production situation of wood-panel products in the country started well, and achieved steady growth compared with the same period of last year. The output growth rate further expanded compared with the same period of last year. As of June, the cumulative output increased by more than 30%. At the same time, as of June, the cumulative increase in production of the national furniture industry has slightly increased.
Specific statistics show:
From January to June 2012, the national production of furniture products totaled 325 million pieces, a year-on-year increase of 1.54%, which was 3.6 percentage points lower than the same period last year. The monthly output was 55.376 million pieces, a decrease of 3.26% year-on-year and a 5.83% quarter-on-quarter increase.
Among the main furniture products, the output of wooden furniture from January to June was 114 million pieces, a year-on-year increase of 6.93%. The monthly output was 21,118,800 pieces, a decrease of 6.46% year-on-year; the output of soft furniture (including mattresses and sofas) from January to June was national. It was 19.424 million pieces, an increase of 4.8% year-on-year. The output in June was 360.59 million pieces, a decrease of 3.8% year-on-year; the production of metal furniture in January-June was 163 million pieces, a decrease of 2.14% year-on-year. In June, the production of metal furniture was 25.513 million pieces, a year-on-year decrease. 4.22%. The proportion of wooden furniture increased by 6.75%, metal furniture increased by 7.39%, and the production of the industry increased compared with the previous period.
From January to June 2012, the national wood-based panel production was 125 million cubic meters, a year-on-year increase of 23.34%, which was 13.19 percentage points lower than the same period last year. In the same month, the national man-made board supply was 25.252 million cubic meters, an increase of 15.91% over the same period of the previous year, an increase of 15.89% from the previous month, and the monthly output rebounded sharply.
Among all kinds of wood-based panel products, the total production of plywood from January to June was 65.004 million cubic meters, up 23.23% year-on-year. The output in June was 12.929 million cubic meters, an increase of 18.61% over the same period of last year and an increase of 8.09% from the previous month; The monthly production of monthly fiberboard was 25.238 million cubic meters, up 10.7% year-on-year. The output in June was 5.165 million cubic meters, up 14.44% from the previous year, up 7.98% from the same period of last year. The total production of particleboard from January to June was 12.679 million cubic meters, a year-on-year increase. 19.01%, the output in June was 1,304,700 cubic meters, an increase of 11.74% from the previous year and an increase of 17.09% from the same period of the previous year.
A wooden crate has a self-supporting structure, with or without sheathing. For a wooden container to be a crate, all six of its sides must be put in place to result in the rated strength of the container. Crates are distinct from wooden boxes. The strength of a Wooden Box is rated based on the weight it can carry before the top (top, ends, and sides) is installed, whereas the strength of a crate is rated with the top in place. In general conversation, the term crate is sometimes used to denote a wooden box.
Although the definition of a wooden crate, as compared to a wooden box, is clear, construction of the two often results in a container that is not clearly a crate or a box. Both wooden crates and wooden boxes are constructed to contain unique items, the design of either a crate or box may use principles from both. In this case, the container will typically be defined by how the edges and corners of the container are constructed. If the sheathing (either plywood or lumber) can be removed, and a framed structure will remain standing, the container would likely be termed a crate. If removal of the sheathing results in no way of fastening the lumber around the edges of the container, the container would likely be termed a wooden box.
Wood Crate,Rustic Wood Crate,Customized Wood Crate,Wooden Wine Crate
Jinan Tri-Tiger Technology Development Co., Ltd , https://www.jinanfurniture.com