[ Chinese wardrobe network ] teach you how to properly check the installation of the whole wardrobe ? Customized a whole wardrobe , no less than a small decoration. From the initial shoal to the installation of the whole wardrobe, as a consumer, I couldn’t help but look forward to being full of uneasiness. This is the time to test your eyesight, the installation of the overall wardrobe.

Basic articles:

1. Carefully observe whether the edge of the plate and the edge has collapsed.

2. Carefully identify whether there is obvious color difference between the edge seal and the sheet.

3, the cabinet against the wall, gently push whether it is easy to shake.

4. Confirm whether the connection density between the plates is true or not.

Strengthen the article:

5. Try the drawers and other places where you can push and pull, check whether it is smooth and no noise.

6. Carefully confirm whether the mask can be properly switched and pulled.

7. Check the surface and inner layer of the wardrobe for damage.

8. There is no obvious pungent odor on the surface of the wardrobe.

9. The overall stability of the wardrobe, and the combination of the ceiling and the ground is tight.

Preparation Phase

1 material arrival: more formal furniture manufacturers, the board is generally shipped with cardboard packaging. After unpacking, check the plates and hardware. For example, the overall wardrobe, in the specific place has Eddie's exclusive logo!

2 Fixing screws: The nails are generally left in the design according to the design. The workers at the site use special tools to fix the screws.

3 Measure the side panel: Since the wardrobe is placed on the wall, the side panel should be sawn off at the position of the skirting. After you have it, look it up and see if it fits.

Installation phase

1 Place the bottom plate: The floor placed on the bottom of the wardrobe should be cleaned beforehand, because it will be very troublesome to clean up after installation.

2Fixed frame: Install the side and back panels of the closet according to the grooves on the board, and adjust the position between the boards.

3 Install the top plate: It is best to prepare a climbing stool on the site. The top plate should be lifted up and then fixed with rivets.

4Installing the shelf: Place the shelf in the place where the screws are pre-punched, and then fix it. Pay attention to the fixed position of the shelf and the back and side panels.

5 Fixed door rail: The door rail is installed on the top and bottom of the wardrobe. The alloy material of the door rail is better, light and firm.

6 Install the clothes rail: Fix the rivet in the reserved position and install the clothes rail. Note that the two sides should be balanced.

Finishing stage

1Installing the door leaf: Two sliding doors should be attached to the position of the guide rail. Fix the door leaf first and then fix the guide rail of the bottom side to avoid the phenomenon that the door leaf falls off in the future.

2 adjustment and improvement: After all the installation, make a "full inspection" on the wardrobe, if there is deviation, adjust it in time.

Complete the acceptance: Shake the cabinet to see if it is firm and the details are in place.

Stainless Steel Bottle

And we got a lot of different kinds of Stainless Steel Bottles. For example: Stainless Steel Cola Bottle, a classic design that is popular in the market and easy to use, also looks good. Speaking of looking, our Cola Bottle comes in changeable colors and diverse patterns.

Stainless Steel Bullet Shape Bottle has another classic design of body shape. This makes the bottle look straight and smooth.

Our Stainless Steel Bottles are mostly Stainless Steel Vacuum Water Bottles. They have a double-wall vacuum treatment, so they can ensure your drink keeps as it is. And you don't need to worry about getting your hands cold or hot.

Stainless Steel Single Wall Bottle has a single wall. It sacrifices thermal insulation and improves portability. Holding it in your hand all the time will not cause any discomfort.

Stainless Steel Bottle,Stainless Steel Shaker Bottle,Stainless Steel Bottle 304,Stainless Steel Solid Color Bottle

Ningbo Auland International Co.,Ltd. , https://www.everwaterbottle.com