Detection range: 96T200pg/ml – 4800pg/ml Use purpose: This kit is used to determine the content of apoptosis-related factor ligand (FASL) in serum, plasma and related liquid samples. Experimental principle This kit uses the double antibody sandwich method to determine the level of mouse apoptosis-related factor ligand (FASL) in the specimen. A microphase plate was coated with purified mouse apoptosis-associated factor ligand (FASL) antibody to prepare a solid phase antibody, and an apoptosis-related factor ligand (FASL) was sequentially added to the microcapsule of the coated monoclonal antibody, followed by HRP. The labeled apoptosis-associated factor ligand (FASL) antibody binds to form an antibody-antigen-enzyme-labeled antibody complex, which is thoroughly washed and then added to the substrate TMB for color development. TMB is converted to blue under the catalysis of HRP enzyme and converted to the final yellow color by the action of an acid. The depth of the color is positively correlated with the apoptosis-related factor ligand (FASL) in the sample. The absorbance (OD value) was measured at 450 nm using a microplate reader, and the concentration of mouse apoptosis-related factor ligand (FASL) in the sample was calculated from a standard curve. Kit composition 1 30 times concentrated washing solution 20ml × 1 bottle 7 Stop solution 6ml × 1 bottle 2 enzyme standard reagent 6ml × 1 bottle 8 standard product (9600pg / ml) 0.5ml × 1 bottle 3 enzyme label coating plate 12 holes × 8 strips 9 standard dilution 1.5ml × 1 bottle 4 sample dilution 6ml × 1 bottle 10 instructions 1 part 5 developer A liquid 6ml × 1 bottle 11 sealing film 2 sheets 6 coloring agent B liquid 6ml × 1 Bottle 12 sealed bag 1 specimen requirement 1. The specimens should be extracted as soon as possible after collection, and the extraction should be carried out according to the relevant literature. The experiment should be carried out as soon as possible after extraction. If the test cannot be performed immediately, the specimen can be stored at -20 °C, but repeated freezing and thawing should be avoided. Samples containing NaN3 could not be detected because NaN3 inhibited horseradish peroxidase (HRP) activity. Procedure 1. Dilution of the standard: This kit provides one original standard, which can be diluted in a small tube according to the following chart. 4800pg/ml No.5 standard 150μl original standard added 150μl standard dilution 2400pg/ml No.4 standard 150μl No.5 standard added 150μl standard dilution 1200pg/ml No.3 standard 150μl No.4 standard Add 150μl standard dilution 600pg/ml No. 2 standard 150μl No. 3 standard Add 150μl standard dilution 300pg/ml No. 1 standard 150μl No. 2 standard to 150μl standard dilution 2. Add sample: Blank holes are respectively set (the blank control hole is not added with the sample and the enzyme standard reagent, and the other steps are the same), the standard hole, and the sample hole to be tested. Accurately load 50 μl of the standard on the enzyme-labeled plate, add 40 μl of the sample dilution to the well to be tested, and then add 10 μl of the sample to be tested (the final dilution of the sample is 5 times). Add the sample to the bottom of the well of the microplate, try not to touch the wall of the well, and shake gently to mix. 3. Incubation: After sealing with a sealing film, incubate at 37 ° C for 30 minutes. 4. Liquor: Dilute 30 times concentrated washing solution with distilled water 30 times and reserve. 5. Wash: carefully remove the sealing film, discard the liquid, dry it, fill each well with washing liquid, let stand for 30 seconds and discard it. , repeat this 5 times, pat dry. 6. Add enzyme: Add 50 μl of enzyme labeling reagent to each well, except for blank wells. 7. Incubation: operation is the same as 3. 8. Washing: operation is the same as 5. 9. Color development: add 50 μl of color developer A, add 50 μl of color developer B, gently shake and mix, and avoid light at 37 °C. 15 min.10. Termination: 50 μl of stop solution was added to each well to stop the reaction (the blue color turned yellow). 11. Measurement: The absorbance (OD value) of each well was measured sequentially with a blank air conditioner of zero and a wavelength of 450 nm. The measurement should be carried out within 15 minutes after the addition of the stop solution. Summary of operation procedure: Calculate the concentration of the standard object as the abscissa and the OD value as the ordinate. Draw a standard curve on the coordinate paper, and find the corresponding concentration from the standard curve according to the OD value of the sample; multiply by the dilution factor; or Calculate the linear regression equation of the standard curve by using the concentration of the standard and the OD value. Substituting the OD value of the sample into the equation, calculating the sample concentration, and multiplying by the dilution factor, is the actual concentration of the sample. Note 1. The kit should be taken out from the refrigerated environment and allowed to equilibrate for 15-30 minutes at room temperature. If the enzyme label is unsealed after unsealing, the strip should be stored in a sealed bag. 2. Concentrated washing liquid may crystallize out. When diluted, it can be heated and dissolved in a water bath. The washing does not affect the result. 3. The sampler should be used for each step and the accuracy should be corrected frequently to avoid test errors. It is best to control the loading time within 5 minutes. If the number of specimens is large, it is recommended to use a gun. 4. Please make a standard curve at the same time of each measurement, it is best to make a double hole. If the content of the substance to be tested in the specimen is too high (the OD value of the sample is larger than the OD value of the first hole of the standard well), please first dilute the sample dilution with a certain multiple (n times) and then measure it. When calculating, multiply the total dilution by the total dilution. Multiple (×n×5). 5. The sealing film is intended for single use only to avoid cross-contamination. 6. Keep the substrate away from light. 7. Strictly follow the instructions of the manual, the test results must be based on the microplate reader reading. 8. All samples, washings and various wastes should be treated as infectious materials. 9. The different batch components of this reagent must not be mixed. 10. In the case of an English manual, the English manual shall prevail. Storage conditions and validity period 1. The kit is stored at: 2-8 °C. 2. Validity: 6 months __
Side boards
Sideboards, also known as buffets or credenzas, are versatile furniture pieces commonly used in dining rooms, living rooms, or entryways. They provide both storage and display space while adding a stylish and functional element to the room. Here are some key aspects to consider when choosing a sideboard:
-
Size and Proportions: Measure the available space in the room where you plan to place the sideboard. Consider the length, height, and depth of the piece to ensure it fits appropriately and doesn't overpower the room or obstruct walkways.
-
Storage Capacity: Assess your storage needs and choose a sideboard with sufficient space to accommodate your belongings. Look for a combination of drawers, shelves, and cabinets that can store items such as dishes, table linens, servingware, glassware, or other household items. Adjustable shelves or removable dividers can provide flexibility in organizing your belongings.
-
Style and Design: Consider the overall style and decor of the room when selecting a sideboard. Whether your room has a modern, traditional, rustic, or eclectic style, choose a sideboard that complements the existing furniture and aesthetic. Pay attention to details such as the shape, finish, handles, and hardware to ensure they align with your desired style.
-
Material: Sideboards are available in various materials, including wood, metal, glass, or a combination of these. Consider the durability, maintenance requirements, and visual appeal of different materials to find the one that suits your preferences and matches the existing furniture in the room.
-
Functionality: Determine how you plan to use the sideboard. If it's primarily for dining room use, consider features like wine racks, plate grooves, or a hutch top for displaying fine china or decorative items. If it's for a living room or entryway, focus on storage options for books, media devices, or other personal items.
-
Surface Space: Evaluate the amount of surface space you need on the sideboard. Consider whether you'll use it for displaying decor items, serving food during gatherings, or as a workspace for setting up a beverage station or a temporary bar. Ensure there's enough room to accommodate your intended use.
-
Door Type: Sideboards can have different door configurations, including hinged doors, sliding doors, or a combination of both. Consider the accessibility you prefer and the space available in the room when choosing the door type. Sliding doors can save space and provide a sleek look, while hinged doors offer a more traditional and open feel.
Wood Sideboard Cabinets,Modern Sideboard,Designer Sideboards,Dressers & Wooden Sideboard,Small Sideboards
Ningbo Greenly Industy Co.,LTD. , https://www.chinagreenly.com