In recent years, solid wood furniture has been deeply loved by consumers. The demand for wooden furniture has gradually increased from focusing on appearance to focusing on materials. More new products are based on original design and high-quality raw materials. What is the manufacturing process of solid wood furniture?
Preparation of solid wood furniture production process
The original wood is transported by container, and each raw wood is subject to commodity inspection: fumigation and insecticide. Strictly in accordance with national import and export standards. Each timber log is equipped with an internationally authoritative FCS certification mark. After the original timber is transported to the wood processing plant, it is unloaded in strict accordance with the standard process, and the log classification is unified. According to the classification of the required materials, pick and cut into moderate lengths. Before the processing of the logs, each piece of wood was scanned by a computer, and the data of the wood defects was analyzed, and sawing was performed by a frame sawing method to form a sheet. Accurate classification of wood and specifications. The high-quality parts of the logs are processed for processing, which fully guarantees the utilization rate of the wood and the high quality of the plates.
Wood furniture manufacturing process
Drying
After the sawed wood is sorted, it is naturally dried. Because the thickness is not equal, there will be natural drying ranging from 6 to 18 months, which is the natural evaporation of water, allowing the wood to naturally contract and ensure the stability of the wood. Then use professional drying equipment to dry, after drying, it still takes 50-80 days of wood health before it can enter the workshop.
2. Double-sided planing
The use of natural drying, air drying, and a certain period of wood health, in order to fully ensure the flatness of the layout and the stability of the board, in the process of double-sided planing, the waste of materials is minimized.
3. Drying contrast
4. Multi-blade saw
After the double-sided planing, the plate directly enters the multi-slice saw, cuts, cuts into multiple points, and the material is flat and not easy to bend. The finger-jointing board is used, the plate availability rate is high, and the manual repeated processing and production cost are saved.
5. Preferred saw
The use of advanced computer equipment, directly controlled by the computer, and automatic removal of log knots, and classified according to specifications. Lower than conventional materials for knuckle production, improve work efficiency, ensure wood quality, and fully save costs.
6. Finger joint assembly line
The knuckle assembly line is processed below the conventional material to ensure the full utilization of the material.
7. Straight
Straight panels are generally used for furniture surface location, which is an important part of furniture manufacturing. Heavy-duty jigsaw puzzles are used to solve the problem of uneven shrinkage, uneven surface, cracking and degumming.
8. Glue
The standard of formaldehyde free formaldehyde in furniture glue is ≤1.0.
9. Health
All the plates that will be put together will still be treated for three working days, and the plates will be dehumidified and kept at a constant temperature. Ensure that furniture production is more stable and reliable.
Woodworking
Milling type
The spliced ​​sheet will be milled by mechanized operation
2. Drilling
3. Grinding
The shaped parts of the workpiece are manually ground and the flat parts are mechanically ground. Make sure that each product part is shiny and flawless.
4. Stable with traditional æ¦«å¯ structure
5. Expansion groove, expansion joint
paint
Firstly, the quality of the logs is screened, and the background color is selected according to the requirements of the swatches, and the color difference between the materials is adjusted by the background color. Make the natural texture more prominent, the color is consistent, and the layering is strong. Dust should be cleaned before painting, check whether the coloring effect is good, and dry for 6-8 hours after spraying. Fill all the scratches first, then sand them gently with sandpaper, mainly to smash the burrs generated on the painted products. Dust is blown clean before painting. The primer concentration is 18 seconds, the thickness is a cross, and it is dried for 6-8 hours after spraying. Before repairing, you must first check whether the product is a good product, and the dust and contaminants on the product should be cleaned up. A technician has prepared a good color, and then compares the swatches with a pre-production sample before they can be confirmed. Before the topcoat, it is necessary to check whether the product is a good product. The surface of the product is smooth, and the surface attachments and dust must be cleaned up. The topcoat has a concentration of 11-12 seconds and a thickness of one cross. After the topcoat, place the workpiece to dry.
Extended reading: Is the solid wood furniture you bought really genuine?
The finished solid wood furniture will flow to the market, so the choice of solid wood furniture is also not negligible for home decoration. The purchase of solid wood furniture is very important, and it can reflect the individual's cultivation and taste. What kind of solid wood furniture is suitable for us?
Buying points to see wood grain and knots
Due to different materials, in the home store, the same table, the price of solid wood furniture and sheet furniture is more than a thousand dollars. According to the senior shopping guide of Daming Palace Home Building Materials City, compared with the panel furniture, the special material of solid wood forms the natural color difference, wood knot and texture. When you purchase it, you can identify the solid wood according to the introduction of the merchant. With plates.
Buying skills three to see two touches and one pressure
Due to the need of environmental protection, there are fewer and fewer pure solid wood furniture. Most of the solid wood furniture is made by the combination of solid wood and wood-based panels. This process avoids cracking and warping due to the large-area use of solid wood. At the same time of deformation, it not only maintains the beautiful texture of pure natural logs, but also the noble and elegant essence of solid wood furniture. Nanyang Dick furniture sales staff told reporters that because of the different processing techniques, the purchase of such solid wood must be "three look and two touches and one pressure."
Paint quality
After the surface of the board has been processed by paint, it is called a lacquer board. When selecting, pay attention to three or three.
The third is: the paint should be even, smooth and flat (not included in the chamfer).
Nothing is no leakage, no bubbles, no cracks.
Towel Bars
The strongest and most powerful feature of Yufa's bathroom accessories is our consistent high quality. From design to manufacture, each product is essence of creation. Towel bars, Towel Rings , Tumbler Holders,Soap Holders, Wire Baskets, Tissue Holders and other exquisite accessories for your selection.
Towel Bars,Pipe Towel Bar,Double Towel Bar,Brass Towel Rack
Kaiping Yufa Sanitary Ware Co.,ltd , https://www.yufa-bathroom.com