Due to the improper operation of the staff or the influence of the environment and climate, the service life of the UV aging test box will be shortened. How to correctly use and place the UV aging test box to extend the life? The following points are summarized by the Beijing Yashilin Technical Department. Please check carefully:
Conditions for placing the UV aging test box:
1. After the installation, sufficient maintenance space should be reserved between the equipment and the adjacent wall or other equipment;
2. In order to exert the function and performance of the test equipment stably, the place where the annual temperature is 15 ℃ ～ 28 ℃ and the relative humidity is not more than 85% should be selected;
3. It should be installed in a place away from combustibles, explosives and high-temperature heat sources;
4. It should be installed in a place with little dust;
5. Install as close to the power supply as possible;
6. It should be installed in a place without direct sunlight;
7. It should be installed in a well-ventilated place;
8. Avoid sudden changes in the ambient temperature of the installation site;
9.It should be installed on a level ground (a level should be used to determine the level on the ground during installation);
Operating conditions of ultraviolet aging test box:
1. The sensor device in the working room must not be subjected to strong impact.
2. Non-full-time operators shall not operate at will.
3. Please contact the manufacturer if the equipment fails to remove the fault.
4. During the operation of the equipment, sufficient water source must be maintained.
5. Because ultraviolet radiation has a strong hazard to people (especially eyes), the operator should minimize exposure to ultraviolet light (contact time should be <1min). It is recommended that the operator wear protective goggles and a protective cover.
6. The test stage should minimize the time to open the door.
7. After a long period of discontinuation of use, if you need to use it again, you must carefully check the water source, power supply and various parts, and then start the equipment after confirming that it is correct.
Note: This article is an original article of Beijing Yashilin Testing Equipment Co., Ltd. Please be sure to indicate the source: Beijing Yashilin, and attach a link
The Face access control attendance machine is mainly used for the attendance statistics of the company's employees. Have Android attendance Face Recognition and Linux attendance face recognition When employees sign in, they need to collect the employee's facial photos through the camera, and then use the attendance face recognition algorithm to obtain the feature values from the collected photos and store them in the database in face access control attendance system. Analyze and compare the feature values of the employee's face photos. If the employee's name is reported after the recognition is successful, the attendance is successful.
Android Attendance Face Recognition,Linux Attendance Face Recognition,Face Access Control Attendance System,Face Access Control Attendance Machine
Guangdong Zecheng Intelligent Technology Co., Ltd , https://www.szzcsecurity.com