[ Chinese wardrobe net ] The finished wardrobe is bought and placed in the bedroom or the cloakroom. However, the installation of the custom closet can be much more troublesome. It needs to be tailored according to the type of your home. How to install the custom closet? What are the precautions? Let's take a look at the detailed installation process of the custom closet.
How to install a custom closet
1. Preparation stage:
1 expected to arrive
More formal furniture manufacturers, cardboard packaging is generally shipped to the site. After unpacking, check the plates and hardware.
2 fixing screws
The nails are generally left on the plates according to the design drawings, and the workers at the site use special tools to fix the screws.
3 cutting side panels
Since the closet is placed against the wall, the side panel is sawn off at the position of the baseboard. After you have it, look it up and see if it fits.
2. Installation phase:
1 put the bottom plate
The floor placed on the bottom of the wardrobe should be cleaned beforehand, because it will be very troublesome to clean up after installation.
2 fixed frame
Install the side and back panels of the closet according to the grooves on the board and adjust the position between the boards.
How to install a custom closet
3 installation top plate
It is best to prepare a climbing stool on the scene. The top plate should be lifted up and then fixed with rivets.
4 mounting shelf
Place the shelf where you have previously screwed it and then secure it. Pay attention to the fixed position of the shelf and the back and side panels.
5 fixed door rail
The door rails are installed on the top and bottom sides of the wardrobe. The material of the door rails is better, lighter and firmer.
6 installation of clothes rail
Fix the rivets in the reserved position and install the clothes rail. Note that the two sides should be balanced.
3. Final stage:
1Installing the door leaf
The two sliding doors should be attached to the position of the guide rails. Fix the door leaf first and then fix the guide rails at the bottom side to avoid the phenomenon that the door leaf falls off in the future.
2 adjustment and improvement
After all the installations are completed, make a "full inspection" of the wardrobe. If there is any deviation, adjust it in time.
4, complete the acceptance
Finally, check the wardrobe: Shake the cabinet to see if it is firm and the details are in place.
The above is all about sharing the custom closet and how to customize the wardrobe installation process, I hope to help everyone.
Superabsorbent
superabsorbent polymers (known as SAP) are water-insoluble polymer, cross-linked copolymer of acrylic acid. It is in the form of white, odourless granules. This water-absorbing polymer is produced by acrylic acid and a cross-liner solution through polymerization. This product has the character of superabsorbent which makes this material could absorb and retain water of hundreds of times of its weight shortly. Moreover, this product is able to hold absorbed water even against pressure.
SAP has a unique body-shaped network structure, which gives it a superior water absorption capacity. And SAP absorbs water quickly and has good water retention performance. Even if it is subjected to an external force, it is difficult to separate the absorbed moisture and have a certain elasticity. Therefore, SAP has been widely used in the field of sanitary products, and has become one of the main raw materials for Baby Diapers and Adult Diapers.
Thinner and lighter, reducing the amount of fluff pulp has become the trend of modern baby Diapers. At present, there has been a method of using a powder layer (gradually pulverized) as a core, that is, superfine SAP and fluff pulp are mixed together as a core. The product has good diffusion and anti-leakage properties and can be applied to any kind of baby diapers or sanitary napkins.
In the case of using less fluff pulp, the liquid transport and short-term storage performance of the diaper are lowered. Therefore, it is necessary to consider the application of thicker and better performing conductive layers. This also gives rise to the overall softness of the baby diaper - by using other soft materials, such as a laminate of a breathable film and a soft hot air bonded nonwoven, a softer conductive layer and soft and fluffy surface layer.
Superabsorbent has been widely tested and is considered to be non-toxic by ingestion or application to the skin and not irritating or sensitising to the skin. Testing against various ecological indicator organisms indicates that the material does not represent an environmental hazard.
Baby Diapers With Sap,Super Soft Baby Diapers,Newborn Diapers With Sap,Disposable Baby Diapers With Sap
Zhejiang Youquan Care Products Technology Co., Ltd. , https://www.youquancare.com