Temperature and humidity control system: high accuracy belongs to a high-precision constant temperature and humidity incubator. The temperature controller and humidity controller operate online. Advanced dynamic control technology makes the temperature and humidity reach the best state. 1 Temperature: The temperature controller adopts high-speed, high-performance CPU processing chip, high-sensitivity, high-precision platinum resistance sensor, with fixed programming control function of timing startup, timing shutdown, fixed value work, timing time reaches 99 hours 2 Temperature control instrument Self-contained sensor failure alarm, upper and lower limit temperature deviation alarm, over temperature alarm, parameter memory, temperature display correction, self-diagnostic dynamic control technology 3 It has an independent temperature limit alarm system, which automatically interrupts when the temperature is exceeded to ensure safe operation of the experiment. 4 Humidity: PTD microprocessor control, touch type, direct-reading digital display, imported humidity sensor and advanced humidification technology, accurate humidity control, humidification block, uniform humidity stability.
Refrigeration heating and humidification system 1 Refrigeration: Compressor unit with high and low pressure protection, intelligent refrigeration and frost-free operation technology, self-detecting compressor start-stop control program, low noise, small life, and small temperature fluctuations 2 Heating: omnidirectional three-dimensional heating technology , To ensure the uniformity of the temperature in the studio, the box is equipped with an independently controlled lighting lamp, which can clearly observe the contents of the box. 3 Humidification: The use of imported humidity sensors and advanced humidification technology, accurate humidity control, humidification block, uniform humidity, secondary storage type Automatic water inlet and water shortage alarm function 4 The power output of cooling, heating and humidification is controlled by microcomputer calculation in the intelligent instrument.
Box structure and materials 1 Mirror stainless steel studio, high-quality steel plate electrostatic spray shell, single door structure, double-layer tempered glass observation window, when the temperature inside the box is quite different from the ambient temperature, you can clearly observe the contents in the box. Stainless steel polished shelf, shelf bracket can be adjusted at will, safe, convenient, novel and beautiful. 2 The omnidirectional three-dimensional heating technology ensures the uniformity of the studio temperature. The box is equipped with an independent lighting lamp, which can clearly observe the contents of the box. 3 Reasonable design of air duct structure and breeze air circulation design to make the temperature in the working room even. 4 Temperature measurement port: located on the inner wall of the box 5 Terminal: power cable located on the lower back of the box 6 Controller: located above the box, equipped with temperature control instrument and humidity control instrument, built-in control system, compensation wire connected to sensor
A cabinet is a case or cupboard with shelves and/or drawers for storing or displaying items. Some cabinets are stand alone while others are built in to a wall or are attached to it like a medicine cabinet. Cabinets are typically made of wood (solid or with veneers or artificial surfaces), coated steel (common for medicine cabinets), or synthetic materials. Commercial grade cabinets usually have a melamine-particleboard substrate and are covered in a high pressure decorative laminate, commonly referred to as Wilsonart or Formica.
Cabinets sometimes have one or more doors on the front, which are mounted with door hardware, and occasionally a lock. Cabinets may have one or more doors, drawers, and/or shelves. Short cabinets often have a finished surface on top that can be used for display, or as a working surface, such as the countertops found in kitchens.
A cabinet intended to be used in a bedroom and with several drawers typically placed one above another in one or more columns intended for clothing and small articles is called a dresser or a Chest Of Drawers. A small bedside cabinet is more frequently called a Nightstand or night table. A tall cabinet intended for clothing storage including hanging of clothes is called a wardrobe or an armoire, or (in some countries) a closet if built-in.
Living Room Cabinet,Living Room Storage Chest,Living Room Display Cabinet,Living Room Storage Cabinet
Jinan Tri-Tiger Technology Development Co., Ltd , https://www.tri-tigerfurniture.com