If you want to ask a house, which area uses the most tiles, then it belongs to the kitchen and bathroom. As far as the bathroom is concerned, as a functional area for washing, the bathroom is in a humid environment for a long time. The tiles on the walls and floors are not only waterproof and moisture-proof, but also wear-resistant and easy to clean. However, due to the different manufacturing processes, there are many types of ceramic tiles on the market. Common tiles are full-body tiles, glazed tiles, polished tiles, vitrified tiles, mosaics, antique tiles, etc., and the characteristics of different tiles are different. So what tiles are suitable for the bathroom? What should I pay attention to when choosing bathroom tiles ? We will now take a look at the tips for choosing bathroom tiles !
1. What tiles are suitable for the bathroom?
As a toilet drainage area, the bathroom is inevitably humid and flooded with water. The tile waterproof effect in the bathroom is really good. However, the bathroom floor tiles are wet, which will inevitably cause people to slide to injury. Therefore, it is best to choose non-slip and wear-resistant full-body tiles for the bathroom floor tiles; It is also richer and has a good decorative effect.
2. Tips for choosing bathroom tiles
1. Look at the water absorption rate
Different ceramic tiles have different characteristics due to different manufacturing processes. Because the bathroom is humid and watery, it is best to choose tiles with low water absorption, which is helpful to keep the bathroom dry. In general, the better the quality of the tiles, the lower the water absorption. When choosing a tile, if you do not directly indicate the water absorption rate, you can place a water drop on the back of the tile. After a few minutes, check the degree of diffusion of the water drop. The less water absorption, the lower the water absorption rate and the better the quality. The tiles with high water absorption rate will cause cracks on the surface of the tiles and peel off of the whole wall and floor tiles after thermal expansion and contraction. Pay attention to this problem when decorating the bathroom in the northern area.
2. Look at the texture density
In terms of texture density, higher density tiles should be selected. When choosing, consumers can observe from the side whether the brick surface is smooth and whether there are pinholes with uneven thickness. At the same time, you can tap the tiles to hear whether the sound is crisp. The more brittle the sound, the higher the density of the tiles and the better the hardness. Such tiles are laid in the bathroom space, which is not easy to be damaged, but also easy to maintain and clean. High-density ceramic tiles not only have a harder texture, but also have anti-fouling and dirt-resistant effects, and their quality is better!
3. Pay attention to the anti-skid performance
The bathroom is damp and the floor tiles are moist, which inevitably makes people slip. Therefore, when choosing the bathroom and floor tiles, it is necessary to use non-slip texture. It is recommended to use matte surface or shallow convex and concave shaped tiles to increase friction to achieve anti-skid effect. In addition, you can also choose cultural bricks, non-slip floor tiles.
4. Look at the outer packaging label
When choosing ceramic tiles, you can also pay attention to the product packaging information, such as factory name, factory address, product name, after-sales service phone, specifications, quantity, trademark, production date and the standards implemented. For ceramic tiles, you need to check the CCC certification mark, For interior design and decoration tiles, it is best to choose products that meet the requirements of Class A for radionuclides.
5. Listen to the sound
If you want to determine whether the quality of the tiles is good or not, you can also test it yourself: tap the tiles lightly and listen carefully to their sounds. The products with better quality sound crisp and sweet. Poor-quality products, due to improper raw material formulations, short firing cycle and low firing temperature, will sound "empty" when struck.
6. Specification tone
Under normal circumstances, the space of the bathroom is not too large, generally between 3-7 square meters, so the size of the tile should not be too large, otherwise it will produce a sense of pressure, generally 20 cm, which is a more suitable size. Especially for small-sized toilets, you can choose to match white or light-tone tiles, which can effectively enlarge the space and create a fresh and simple toilet. It is recommended to use white tiles, hexagonal black and white tiles, hexagonal tiles and other tiles.
Regarding the contents of the matters needing attention in the selection of bathroom tiles , the editor has introduced here to everyone, and I hope to help everyone. Although the area of ​​the bathroom is not large, but the use of ceramic tiles is quite large, so everyone needs to be cautious when choosing. For more information, please follow this website!
What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount
If you are interested in brand cooperation, content cooperation, and advertising of this website, please send an email to :.
Choose ceramic tiles
Kaiping Yufa Sanitary Ware Co.,ltd , https://www.yufafaucets.com