1, sample preparation
The length of the sample is 300 mm x 300 mm and the thickness of the sample is 25 mm. The sample is placed in the center sample cell.
2, the setting of instrument parameters
Make the appropriate settings for the controller as required.
3, data calculation
There are three forms of heat transfer for any object: heat transfer, heat radiation, and heat convection. Between each part of the fluid of different temperature fluids, heat transfer due to relative motion is called thermal convection. The movement of the microscopic particles of matter radiates energy in the form of light, called radiation.
Under the condition of temperature imbalance, there is temperature difference in the object, the heat energy distribution is not uniform, and the heat is transferred from the high temperature to the low temperature part without the macroscopic displacement inside the object. When the objects of different temperature are in contact with each other, there is also no material transfer. The heat transfer phenomenon, which is caused by the disordered motion of the microscopic particles of matter, is called heat conduction, also known as thermal diffusion.
According to the heat transfer theory, the heat flux perpendicular to the infinite plate direction is proportional to the temperature difference between the thickness d direction and the flat surface side, and the plate area is inversely proportional to the thickness of the plate (Fig. 2).
T1 –t2
Q = λS --------------------- (1)
d
Where, Q—the heat transferred perpendicular to the plate direction is called the heat flow rate; t1-t2 is the temperature difference between the two sides of the plate; d—the plate thickness; S is the plate area. Λ—is a proportional coefficient called thermal conductivity. So the equation for thermal conductivity is as follows:
d
λ= Q ----------------- (2)
T1 - t2
The above formula is the equation of operation of the thermal conductivity. If the power P is used, P = kQ, k is a coefficient. If the P unit is W (watt), the length unit is m, and the temperature unit is K (°C), the thermal conductivity unit is W/(mK). The thermal conductivity equation becomes:
W* d
λ= ------------------- (3)
S*( t1 – t2)
Equation (3) is the absolute measured thermal conductivity equation.
A bookcase, or bookshelf, is a piece of furniture with horizontal shelves, often in a cabinet, used to store books or other printed materials. Bookcases are used in private homes, public and university libraries, offices and bookstores. Bookcases range from small, low models the height of a table to high models reaching up to ceiling height. Shelves may be fixed or adjustable to different positions in the case. In rooms entirely devoted to the storage of books, such as libraries, they may be permanently fixed to the walls and/or floor.
A bookcase may be fitted with glass doors that can be closed to protect the books from dust or moisture. Bookcase doors are almost always glazed with glass, so as to allow the spines of the books to be read. Especially valuable rare books may be kept in locked cases with wooden or glazed doors. A small bookshelf may also stand on some other piece of furniture such as a desk or chest. Larger books are more likely to be kept in horizontal piles and very large books flat on wide shelves or on coffee tables.
Storage Bookcase,Solid Wood Bookcase,Rustic Bookcase,Wood Bookcase,Wooden Storage Bookcase,Wood Storage Bookcase
Jinan Tri-Tiger Technology Development Co., Ltd , https://www.jinanfurniture.com