In home decoration, many people like to install ceiling lamps, because the ceiling lamps look simple and beautiful, and have a strong decorative. Some consumers don't know how to install after purchasing a ceiling light. Next, install the small series to explain the installation steps of the ceiling lamp for everyone, I hope to help everyone!
First, the installation steps of the ceiling lamp - choose the location
The first thing the device ceiling lamp needs to do is to determine the installation position of the ceiling lamp. For example, the ceiling lamps in the living room, dining room, and kitchen are installed in the middle, so that the light at each position is relatively uniform. In the bedroom, think about the effect of mosquito nets and light on sleep, so try not to install the ceiling lamp above the bed. In addition, the ceiling lamp needs to select a wall or ceiling that can accept the weight of the ceiling lamp, such as a masonry structure, and stop installing it as much as possible, so as not to choose a wooden wall surface, so as to avoid the risk of falling for a long time.
Second, the installation steps of the ceiling lamp - remove the ceiling lamp mask
Remove the ceiling lamp mask. Under normal conditions, the ceiling lamp mask has two fixed ways of rotation and snapping. When disassembling, pay attention to avoid the damage of the ceiling lamp. After removing the mask, the lamp will be replaced by the way. Remove to avoid breaking the lamp during installation.
Third, the installation steps of the ceiling lamp - the installation base
Place the base in the predetermined installation position, mark the wall with a pencil, then take the base, drill the hole with the electric drill, and then install the shrink bolt for fixing the base in the hole, pay attention to the diameter of the hole and the depth of the bolt and the bolt. The specifications match. Then put the base back to the predetermined position and fix it.
Fourth, the installation steps of the ceiling lamp - connecting the wire
After the base is fixed, the power cable can be stopped from the terminal block of the ceiling lamp. It should be noted that the two wires connected to the power line of the ceiling lamp should have good electrical contact, and should be wrapped with black rubber separately. Adhere to a certain interval, if possible, try not to put the two wire heads under the same piece of metal to avoid short circuit and risk.
Fifth, the installation steps of the ceiling lamp - installation mask, charm
After connecting the wires, you can try to power on. If everything is normal, you can turn off the power supply and install the mask of the ceiling lamp. The living room ceiling lamp also needs to be equipped with a series of charms. Since each ceiling lamp pendant is different, the detailed installation method can refer to the product description book. The charms will remain in the ordinary, can be stored after installation, and can be replaced when there is demand in the future.
The above is about the installation steps of the ceiling lamp, I hope to be helpful to everyone! Qi installed network, China's well-known large-scale decoration platform, decoration leading brand. If you want to make a new design, you are advised to apply for the free design service of the net, and help you plan a reasonable space layout and beautiful design through the professional designer's on-site measurement room.
>> Click here for professional designer free room design
Small Cage Trap,Strong Mouse Cage Trap,Humane Mice Trap Cage,Metal Mouse Trap Cage
Hebei Liebang Metal Products Co.,Ltd , https://www.lb-animaltraps.com