Making a big character with Founder Feiteng In Founder Feiteng Software (Version 3î€02), there is a training material that does not mention the simple method of making a large character. Especially suitable for production of conference banners and promotional headlines.
The size of the traditional Founder fonts ranged from 7th to 96 lbs., which ranged from a minimum of 1 î€ 8 mm to a maximum of 33 î€ 9 mm. There were 22 levels respectively, which were basically some of the commonly used fonts in newspaper production. Only the above 22 kinds of font size choices in the Founder NPM newspaper version and the following version 6-0 version of the book version, can not make more than 96 pounds of font size in the above software.
Prior to Feiteng application, all the 96-pound fonts were produced in the Founder Edition (version 6î€0 or more), using pounds as a unit, making use of the book annotations, the production method is relatively simple, but not intuitive (not WYSIWYG. When previewing, the actual output font is not displayed but represented by black squares. The actual size of the font size is more complicated to adjust.
In Feiteng 3î€02, although only the above-mentioned 22 commonly-used font sizes are listed in the font size selection, the 96-point font size can be created by directly inputting the font size data. The production is very convenient and the adjustment is also very convenient. What you see is what you get. Specific steps are as follows:
1 Open the Feiteng software;
2Set the page size (File → Page Setup);
3 draw text block partition size;
4 Enter Chinese characters in the text block;
5 Select the Chinese character font (text attributes → font number → language (font) options → various Founder characters);
6 Select the Chinese character size unit (text attribute → font number → font size selection → unit → pound, millimeter, inch, centimeter, grade, PICA);
7 Enter the Chinese character size data (if it is a square character, select the XY font size item, and then input the size data; if it is a long flat character, select the X font or Y font, and then enter the size data).
8 Press OK to complete the production.
9 Save the page file, such as: DZî€FIT
10 to form a PS file, such as DZî€PS
Finally, you can send large characters through PSP.
After making large characters in Feiteng, you can also make full use of Feiteng's variant characters (character attributes → variant characters) to perform variant processing on Chinese characters, such as: three-dimensional, edge, thickness, hollow, tilt, rotation, etc.) To achieve the effect of landscaping.
If the system output is configured with color inkjet, it can also be color-coded in Feiteng Chinese characters, and finally output color characters.
The final output of large characters is related to the printer format of the back-end output. The wider the printer format, the larger the Chinese character output by a single sheet of paper; if the output format of the printer is only A4, it needs to output the Chinese character of B4 size. After selecting the corresponding option, the system will automatically output the page when publishing, and finally the user will output the page
The size of the traditional Founder fonts ranged from 7th to 96 lbs., which ranged from a minimum of 1 î€ 8 mm to a maximum of 33 î€ 9 mm. There were 22 levels respectively, which were basically some of the commonly used fonts in newspaper production. Only the above 22 kinds of font size choices in the Founder NPM newspaper version and the following version 6-0 version of the book version, can not make more than 96 pounds of font size in the above software.
Prior to Feiteng application, all the 96-pound fonts were produced in the Founder Edition (version 6î€0 or more), using pounds as a unit, making use of the book annotations, the production method is relatively simple, but not intuitive (not WYSIWYG. When previewing, the actual output font is not displayed but represented by black squares. The actual size of the font size is more complicated to adjust.
In Feiteng 3î€02, although only the above-mentioned 22 commonly-used font sizes are listed in the font size selection, the 96-point font size can be created by directly inputting the font size data. The production is very convenient and the adjustment is also very convenient. What you see is what you get. Specific steps are as follows:
1 Open the Feiteng software;
2Set the page size (File → Page Setup);
3 draw text block partition size;
4 Enter Chinese characters in the text block;
5 Select the Chinese character font (text attributes → font number → language (font) options → various Founder characters);
6 Select the Chinese character size unit (text attribute → font number → font size selection → unit → pound, millimeter, inch, centimeter, grade, PICA);
7 Enter the Chinese character size data (if it is a square character, select the XY font size item, and then input the size data; if it is a long flat character, select the X font or Y font, and then enter the size data).
8 Press OK to complete the production.
9 Save the page file, such as: DZî€FIT
10 to form a PS file, such as DZî€PS
Finally, you can send large characters through PSP.
After making large characters in Feiteng, you can also make full use of Feiteng's variant characters (character attributes → variant characters) to perform variant processing on Chinese characters, such as: three-dimensional, edge, thickness, hollow, tilt, rotation, etc.) To achieve the effect of landscaping.
If the system output is configured with color inkjet, it can also be color-coded in Feiteng Chinese characters, and finally output color characters.
The final output of large characters is related to the printer format of the back-end output. The wider the printer format, the larger the Chinese character output by a single sheet of paper; if the output format of the printer is only A4, it needs to output the Chinese character of B4 size. After selecting the corresponding option, the system will automatically output the page when publishing, and finally the user will output the page
With the Desk Converter, you can join the active office movement without giving up your traditional desk.
The hydraulic lift can be easily operated with one hand and allows a smooth height adjustment of almost 40 cm. The built-in tension adjustment can handle any weight up to 16 kg and the double X construction distributes the weight evenly at any height.
The Standing Desk accord with ergonomics and increase your productivity and our standing desk brings you healthy every day. Standing desk adjustable desk Stand Up Desk converter.
We are manufacturer of Desk Converter in China, if you want to buy Standing Desk Converter ,Sit Stand Desk Converter,Sit To Stand Desk Converter please contact us.
Desk Converter,Standing Desk Converter,Sit Stand Desk Converter,Sit To Stand Desk Converter,Adjustable Standing Desk Converter
Suzhou Uplift Intelligent Technology Co., Ltd , https://www.uplift-system.com