Nowadays, there are many wall lamps on the market that can adjust the luminosity freely. Therefore, the wall lamp is very suitable for installation in the bathroom. It can bring a gentle atmosphere to the white-toned bathroom, which makes the bathroom more warm. So how to install bathroom wall lamp, bathroom wall lamp mounting height is how much, how to stay in line bathroom wall lamp, bathroom wall lamp is broken how to do it? Let us know the specifics below!
First, how to install the bathroom wall lamp
The installation method of the bathroom wall lamp, the first thing to do is to fix the lamp holder, then mark the position of the wall bracket, then punch the hole, punch the bracket into the wall, fix it with screws, if If there is already an embedded line on the wall, it is enough to connect the line. Of course, if you don't want the bracket to be fixed, there are several ways to fix the wall light, which are:
1. The adhesive can be applied to the contact surface of the home wall lamp and the wall by brushing and spraying, and pressed by hand to make it adhere.
2, you can use the rain-type automatic device to apply the glue, so that the glue does not block the nozzle. All of the above methods can be borrowed. You can choose the size of your wall lamp or the wall.
Second, the bathroom wall lamp installation height
The installation height of the bathroom wall lamp is normally in a harmonious angle with the eyes, because the height of the wall lamp installation can affect its brightness and concentration. Therefore, when installing the wall lamp, consider the actual situation. Generally, the installation height of the bathroom wall lamp is generally 1440-1850 mm from the ground, between three-quarters and two-thirds of the wall. In addition, we have to consider the average height of the whole family, generally 200 mm above the average height, slightly higher than the head. Therefore, the indoor installation height of the wall lamp adopts a humanized method, and the installation height of the wall lamp in different places is also different, and is also specifically installed in accordance with the specific conditions of the bathroom.
Third, how to leave the bathroom wall lamp
1, the installation of the wall lamp does not have to use a wire box
In fact, the installation of the wall lamp does not have to use the wire box. We can also directly connect the live wire of the switch output and the neutral wire in the power supply line. The wire laying is divided into two ways: open line and dark line.
2. The open line is laid to expose the wires to the surface of the wall.
It is also possible to expose the wires to the surface of the wall by the open line. The advantage of this is that the construction is simple and the cost is relatively low, and the wires are easy to dissipate heat and easy to overhaul. The disadvantage is that it is not beautiful.
3. The dark wire is laid in the wall and the insulating sleeve is laid.
The dark line is laid in the wall with an insulating sleeve, the wire is connected to the junction box in the sleeve, and the wires of the electric appliance are connected in the junction box, and the advantages and disadvantages thereof are opposite to the laying of the open line.
Fourth, how to do when the bathroom wall lamp is broken
1. Remove the hanging wall lamp
If the bathroom wall lamp is broken, the first thing to do is to remove the bathroom wall lamp. When the bathroom wall lamp is removed, the plug must be unplugged, and then the plug on the rectifier should be unplugged. It must not be hard, and it will not damage the accessories of the lamp. At that time, just remove the lamp and take out the good lamp that was originally bought, and use a circlip to clamp it. At this time, you can plug the rectifier plug light to have a filament at each end.
2, check the hanging wall lamp problem
When disassembling the luminaire, you must not forget to disconnect the power supply first. Don't think that this is not important. Some people think that it is not a big problem to change a light, but sometimes the problem is the details. After turning off the power, remember to check what is going on, so that you know that the bulb is broken or the contact of our lamps is poor, so that you can prescribe the right medicine.
The above is about how to install the bathroom wall lamp, the installation content of the bathroom wall lamp , I hope to be helpful to everyone! Qi installed network, China's well-known large-scale decoration platform, decoration leading brand. If you want to make a new design, you are advised to apply for the free design service of the net, and help you plan a reasonable space layout and exquisite design through the professional designer's on-site measurement room.
>> Click here for professional designer free room design
Disclaimer: We have used all means to find the source of the picture or content. We have not found the relevant right holder. Please ignore the negligence. If the relevant rights holders see it, please contact us in time. We will delete and proceed as soon as possible. Handle it properly.
1 Tier Iron With Powder Coating Dish Rack
1 Tier Iron With Powder Coating Dish Rack,1 Tier Powder Coated Dish Rack,Metal Dish Rack With Drain Tray,Standing Metal Dish Rack
Jiangmen Jianghai Jianshang Houseware Co.,LTD. , https://www.jm-jianshang.com