Do not forget the five major considerations when purchasing furniture

The choice of furniture in the room can show the enthusiasm and interest of the homeowner. Exquisite furniture design can also inspire and inspire people. For those who pursue individuality, the furniture they like must also be those that can lead the trend. How can I make my home dress more in line with the warm and romantic theme?

Xianghe Furniture City official website recommended search reading: furniture materials furniture purchase misunderstanding furniture environmental standards

1. Is the furniture material reasonable?

Different furniture, surface materials are different. Such as tables, chairs, cabinet legs, the use of hardwood, relatively strong, can bear the weight, while the internal materials can be used other materials; the thickness of the large wardrobe legs to 2.5 cm, too thick is clumsy, thin and easy to bend Deformation; kitchen and bathroom cabinets can not be made of fiberboard, but should be used with plywood, because the fiberboard will expand and damage when exposed to water; the dining table should be washable.

It was found that the wood had insect eyes and dropped, indicating that the drying was not complete. After checking the surface, open the door and drawer door to see if the inner material is rotten. You can use your fingernail to lick it. If you break it in, it means that the inner material is decaying. After opening the door, smell it with your nose. If it is nose, glare, or tears, it means that the formaldehyde content in the glue is too high and it will be harmful to the human body.

Second, is the furniture four feet flat?

Putting the furniture on the ground and shaking it, some furniture only have three legs to land. Look at the desktop is straight, can not bow back or collapsed. The table top is raised, the glass plate is placed on it, and the table top is recessed, and the glass plate is crushed by a pressure. Pay attention to the inspection of the cabinet door. The slit of the drawer should not be too large. It should be horizontal and vertical, and the door should not sag.

Third, the furniture structure is firm

Small pieces of furniture, such as chairs, stools, hangers, etc., can be dragged on the concrete floor when picking, gently falling and falling, the sound is crisp, indicating that the quality is good; if the sound is dumb, there is a murmur in the slap, indicating that the eyes are combined Not tight, the structure is not strong.

The table can be shaken by hand to see if it is stable. The sofa can sit and sit. If you sit on the move, you will slam, and when you shake it, it will be nailed and it will take a long time.

Square tables, tables, chairs and other legs should have four triangular clips to fix the function. When you choose, you can look over the table and chair. The cloth chair can be touched by hand.

Fourth, the veneer furniture is not strict

Whether it is veneer veneer, PVC or pre-painted paper, it is necessary to pay attention to whether the leather is flat, whether there is drum, foaming or not.

Look at the light when you check it, otherwise you won't see it. The ash veneer veneer furniture is more susceptible to damage and can only be used for two years. In the case of wood veneers, the veneered veneers are better than the chopped ones. The way to identify the two is to look at the pattern of the wood. The wood texture of the cut veneer is straight and dense, and the veneered veneer pattern is curved and sparse. Particleboard veneer furniture, the ground part must be edged, and the edge banding will absorb moisture, swell and damage. Generally, the corners of the veneer furniture are easy to tilt up. When picking up the , you can use your hand to rub the corners. If you pick it up, it means there is a problem with the glue.

5. Is the furniture edge flat?

The edge is not flat, indicating that the inner material is wet, and the seal will fall off in a few days. The edge banding should also be rounded and not straight at right angles. The edges sealed with wood strips tend to get wet or crack. The furniture inlaid with the plywood is nailed with nails. It is necessary to pay attention to whether the nails are flat and whether the color of the nails is consistent with other places. Usually the nails are sealed with putty. Pay attention to whether the putty is bulging. If it is bulging, it will not work. Slowly, the putty will fall out from the inside.

Gas Fire Pit

Black gas firepit is a versatile gas-burning firepit, perfect for any yard or patio and indoor. It`s easy to move from one spot to another, and it is big enough for friends party and also great for just a small family affair. This gas firepit is equipped with four pieces decorative glasses.Gas regulator from different countries can be supplied. and they all have certification for different countries. The decoration covering the flame can be high temperature resistant glass balls and volcanic stones.It is the most common heating tool in modern families. Compared with the liquid gas heaters, electric heaters and coal-fired heaters used in traditional families, it is more convenient and fast, and the safety is relatively high.In the cold winter, the temperature drops sharply, more than ten degrees below zero is very common, so a variety of heating equipment has become an essential product for people. Gas heater is a very popular heating equipment, a lot of people have in the home to buy and use. However, consumers who need to buy heating equipment often do not have a special understanding of these products. Today, we will introduce some product features and advantages of gas heaters to help more consumers buy the most suitable products when they buy gas heaters.

Gas Fire Pit,Propane Fire Pit,Outdoor Gas Fire Pit,Gas Fire Pit Table

Henan Jinbailai Industrial Co.,Ltd , https://www.jblbbqgrills.com