Although there is no problem in the working condition of the high and low temperature alternating humid heat box, the noise is relatively large as the "age" increases. However, it is a pity to eliminate it because of the noise. In fact, noise pollution is not difficult to solve. As long as you master the following methods, you can effectively reduce the noise.
(1) Pipeline and box reinforcement
Check to see if the connection between the outer pipe and the casing is loose, so as to avoid resonance when the compressor is working. In order to avoid loosening, the outer pipe must be fixed, and the bolt should be spring washer.
(2) Suppressing tube vibration with rubber block
If the high-low temperature alternating heat and humidity tank is used in the process of noise, the bicycle tire can be taken out, cut into a circular shape with a diameter of 30 mm, and a circular hole with a diameter of about 5 mm is cut out in the middle, and then cut from the outside to the center so that Apply the rubber to the tube. When the compressor of the high-low temperature alternating heat and humidity tank is running, touch the pipe by hand. If there is a tube with a feeling of shaking, you can put a few rubber blocks on it. One test box needs to be 10~20, and the noise will drop immediately. Come down. This is because the rubber block suppresses the "resonance" caused by the vibration of the tube.
For more details, please see below.
AUTRENDS INTERNATIONAL LIMITED , https://www.petspetstoys.com