AATCC series common sun color fastness standard introduction and test instrument

AATCC standard directory listing:

AATCC 8-1996 Colour fastness to rubbing: AATCC rubometer method

AATCC 15-1997 Perspiration fastness

AATCC 16-1997 Light fastness AATCC TM 16-2003 Lightfastness to light

AATCC 61-1996 Color fastness to domestic and commercial washing: Fast method

AATCC 66-1998 Wrinkle Recovery of Fabrics: Recovery Angle Method

AATCC 93-1994 Abrasion Resistance of Fabrics: Fast Method

AATCC 96-1997 Dimensional Changes in Woven Fabrics of Woven Fabrics and Knitted Fabrics in Wool Fabrics

AATCC 99-1993 Change in Size of Wool Woven and Knit Fabrics: Relaxation, Curing, and Milling

AATCC 104-1994 Water spot fastness

AATCC 106-1997 Water fastness: Seawater

AATCC 107-1997 Water fastness

AATCC 111-1996 Weather Resistance: General Introduction

AATCC 111A-1996 weather resistance: daylight arc lighting with wet

AATCC 111B-1996 Weather resistance: natural light and natural climate

AATCC 111C-1996 weather resistance: daylight arc lighting without wetting

AATCC 111D-1996 Weather resistance: natural light and natural weather through glass

AATCC 116-1996 Friction Resistance: Vertical Rotating Friction Meter Method

AATCC 117-1994 Color fastness to heat: Dry hot (not including ironing)

AATCC 124-1996 The appearance of fabrics after repeated home laundering

Common AATCC test standards:

AATCC-TM125 Standard:

AATCC-TM125 Standard Profile:

Light fastness to light:

This method aims to determine the effect of dyed textile samples on the color fastness under the combined effects of sweat solution and light exposure. Therefore, only perspiration solution was used in this test.

Principle: The dyed sample to be tested is immersed in the perspiration solution for a certain period of time and immediately exposed to a light fastness tester for a certain period of time.

Applicable test equipment: Q-SUN B02-S sun color fastness tester

AATCC TM 16 Standard:

AATCC TM16 Standard Profile:

"Color fastness to light":

AATCCTM 16 Standard: General principles and procedures provided by the test methods are currently used to determine the light fastness of textile materials.

The described test program applies to textiles of various materials and is suitable for dyeing, finishing, and post-processing of textile materials.

Principle: The standard sample of textile material is exposed to the same light source under the specified conditions at the same time. The exposed and non-exposed parts of the sample are compared with the AATCC color-changing gray card or colorimeter to evaluate the color fastness of the sample. The color fastness rating is compared with the AATCC standard blue wool under simultaneous exposure conditions.

Applicable test instruments: sun color fastness tester

AATCC TM 169 Standard:

AATCC TM 169 Standard:

Mainly used to measure the weather resistance of textiles: Xenon arc lamp irradiation

1.1 This standard provides an artificial climate device for the exposure of various types of textile materials, including coated fabrics, through the control of test conditions. This standard contains two control procedures: wet and dry samples.

1.2 The ability of a material to resist ageing under the specified test conditions, including its strength (breaking, tearing, bursting) and the degree of decline in color fastness.

Applicable test equipment: Q-SUN B02-S sun color fastness tester

AATCC TM 186 Standard:

AATCC TM 186 Standard Profile:

This test method provides procedures for exposure testing of various types of textile materials, including coated fabrics and products made therefrom. Tests were conducted using laboratory artificial aging exposure devices using fluorescent UV lamps as light source, using condensation humidification and/or spray humidification.

Principle: The sample is exposed to a fluorescent UV light source and periodically humidified under controlled conditions. According to the reference standard and the exposure standard, the material is evaluated under standard textile test conditions and its degradation resistance is expressed as percentage of strong loss or percentage of strong residual (broken or burst) or color change.

Applicable test equipment: Q-SUN B02-S sun color fastness tester

For more common criteria for aging tests visit: http://

,

Lanker Pack Group Limited , http://www.lankerpouch.com

Posted on