With the development and progress of the wooden door industry, the application of aluminum-clad wood technology in the industry is more and more extensive. According to the current situation that the door and window account for the increasing proportion of customized products in the market, the aluminum-clad wood door and window technology is gradually showing It has the advantage of being applied on doors and windows. The production of high-quality products related to aluminum-clad wood doors and windows naturally becomes the most basic responsibility of wooden doors and other door and window enterprises. They are constantly researching and hoping to create products that meet the ever-changing needs of consumers, and they are highly praised by consumers for their quality products.
　　 
The general aluminum-clad wood door and window products have to go through seven steps!
First, we should lay out the sample and make a sample. According to the wood products designed on the drawings, we draw the woodwork structure according to the full scale 1:1 and make it a model. In the process of using the template, pay attention to keep the line clearly, not to bend or break it.
The second step is to carry out the ingredients and cut the materials! The ingredients are to be carried out on the basis of the stakeout. The size and quantity of each part are calculated and the ingredient list is listed. The cutting is to cut the material according to the ingredient list.
Next, we should carry out the planing and planing. The planing material should be used as the front side and the raw materials, including the door and window frame.
　　Then there is the scribing and the eye! Before you open your eyes, you should choose a chisel that is equal to the width of the eye. The eye that is cut out should be straight on both sides of the wood grain. Do not make a mistake. First hit the whole eye, then hit the half eye, the whole eye must first hit the back, when half cut, turn over and then hit the front until it runs through.
The fifth step is to cut and chamfer. The cutting is to cut a square corner of the frame for glass. The cut is required to be straight. The chamfering is also called the inverted eight-word, that is, a triangular portion is cut along the frame.
Then it is assembled! Before assembly, some parts are inspected, the parts are required to be square, the lines are neat and tidy, the surface is smooth, the size specifications and styles meet the design requirements. The assembly of the door and window frame is to put a frame on the other side and put it on the other side.
In the seventh step, the assembly method of the door and window sash is basically the same as that of the door and window frame, then planing and pairing, and finally brushing a preservative is done!
　　Aluminum-clad wood door and window products have great advantages in heat preservation effect, and there is also strong interior decoration. Many consumers value indoors and indoors, and they don’t care much about it. Aluminum-clad wood greatly meets their requirements. ! Some large brands of aluminum-clad wood doors and windows also have a high outdoor protection function. By using different surfaces of the low-e end film, it can also meet the demand for heat conduction in the different environments in the north and south, and more generally under the general conditions. Achieve a very high quality sound insulation coefficient value, create a green sound environment for everyone, and then create a green living space!
After the decoration is finished, if you want to wipe off the dust stains on the doors and windows, please do not step on the frame of the aluminum-clad wood doors and windows or the position where the fan is opened. This is easy to wear the doors and windows. Secondly, it is relatively dangerous!
2. If there are stains that are difficult to remove, if it is on the surface of aluminum-clad wood doors and windows, use a soft cloth with a little water or a neutral detergent to gently wipe; do not use detergent or detergent to reconcile water. Decontamination of acidic, strong alkaline detergents, which corrode the surface of the wood!
3. Every few months, you should check the smoothness of the opening and closing of doors and windows. If you find that important hardware such as bolts, positioning pins, wind braces, hinges, etc. are falling off or damaged, you should contact the professional to repair or replace them. Lubricants should always be kept in the home, and the important parts of the doors and windows should be regularly refueled to ensure smooth and flexible opening!
4. Always clean the groove and the rail part of the aluminum door and window opening position to prevent dust or sand from affecting the hardware of the door and window. Clean it with a vacuum cleaner or a soft brush!
5. During the use of aluminum-clad wood doors and windows, the opening and closing is light, and the push-pull is smooth; if it is found to be closed or the push-pull is obstructed, please do not pull the hard raft, first check whether there is dust or sand in the groove or the slide. Stone, regular cleaning can extend the life of hardware to a certain extent.
Standard Motorized Screen-Octagonal
Standard Motorized Screen,3D Projector Screen,Hd Projector Screen,Home Cinema Projection Screen
Dongguan Aoxing Audio Visual Equipment CO.,Ltd , https://www.aoxing-alr.com