1. Adjust the height with the adjustment screw at the bottom of the box to make the box stable.
2. Plug in the power socket (the power supply should be well grounded), the display is on, at this time the display shows the actual temperature in the incubator room and the last set time.
3. Temperature and time adjustment: press the "SET" key, the decimal point corresponding to the lower right corner of the digital tube lights up, then press the "â–²" or "â–¼" key to determine the parameter to be set, and finally press the key after setting the parameter Press the "ENTER" key to confirm the set parameters.
4. If no lighting is needed in the box, the lighting switch on the panel should be set to the "off" position, so as not to affect the upper temperature.
5. After the temperature is set, the temperature cannot be set back and forth frequently and frequently, so as to avoid frequent compressor startup, causing the compressor to overload and affect the life of the compressor.
6. Two sets of fuse boxes are installed on the back of the machine, the top is the cooling and heating load fuse box, and the bottom is the control power fuse box. If the machine fails, such as temperature control failure, no heating or cooling, the power must be cut off and checked Check if the fuse is intact.
7. Care must be taken during transportation, the angle between the transportation and the horizontal plane should not be less than
45 °.
8. When the use temperature is low, the accumulated water in the bottom water tray at the bottom of the box should be drained regularly.
9. In order to maintain the beauty of the equipment, it is not allowed to wipe the surface with acid or alkali and other corrosive materials. The box can be wiped regularly with a dry cloth.
10. When the instrument is stopped, the power plug should be unplugged.
The
packaging bags of milk powder need to be targeted at the nature of milk powder,
with the following functions: long shelf life, fragrance preservation,
oxidation and metamorphism prevention, moisture absorption and agglomeration
prevention. Therefore the material we will be used for this feature is BOPP/VMPET/PE.
1. The composite material of BOPP meets the
requirements of the milk powder, good printing and strength
2. VMPET has good light resistance, good light
resistance and good ductility. It has metallic luster.
3. PE has good anti-pollution sealing and low
temperature heat sealing.
4. Aluminum
foil with good moisture, rust, gas, light and corrosion resistance, its
stiffness, mechanical strength moderate, good malleability, easy to process,
can be made with paper, plastic composite, high temperature resistance aluminum
plastic composite materials, suitable for high temperature sterilization
packaging, vacuum packaging. The use of aluminum foil composite materials can
effectively improve the shelf life of products; resist oil to the packaging of
infiltration dyeing.
Milk Powder Bag
Milk Powder Bag,Milk Powder Packaging,Milk Powder Pouch,Milk Powder Storage Bag
Shenzhen Sunway Packaging Material Co., Ltd , https://www.sunwaypack.com