FILM EMPTY
The film has run out or the INTAKE sensor does not sense the film and reload the film
WIDTH NOT ENOUGH
The width of the film is not enough. The exposure size defined by the host is larger than the size of the film being used by the imagesetter
AFP POWER OFF 1
The main power switch of the film processor is not turned on, turn on the main power switch
AFP NOT READY
The film processor is not ready to wait for the film processor to reach the working state
AFP POWER OFF 2
The working power of the filming machine is not turned on.Turn on the power switch from the operation panel
AFP BUSY
The processor is busy
DOWNLOAD ERROR
An error occurred during the download, the execution of the download procedure failed. Contact the company that provided the service
MODE MISMATCH
Contact the company that provides the service if the usage pattern does not match
PUNCH DUST FULL
The hole-punch debris collection box is full.
LOADING ERROR
An error occurred during film loading, the film did not reach the position of the INTAKE sensor, the card was removed in the correct way, and the film was reloaded after receiving the film
[NextPage]
FILM JAM 1
Cards, the film does not reach the position of the INTERMEDIATE sensor. Remove the card in the correct way, and reload the film after receiving it
FILM JAM 2
Card, the film does not reach the position of the SET sensor, take out the card in the correct way, and reload the film after receiving it
FILM JAM 3
Cards, film does not reach the position of the DISCHARGE sensor, take out the card in the correct way, and reload after filming
FILM JAM 4
Cards, film remains in the position of DISCHARGE sensor, take out the card in the correct way, and reload after filming
FILM JAM 5
Cards, the film does not reach the position of the OUTLET sensor. Remove the card in the correct way, and reload the film after receiving it
FILM JAM 6
Card, the film remains in the position of the OUTLET sensor. Take out the card in the correct way, and reload the film after receiving it
FILM JAM 7
Cards, when the film is being transported, the cassette is moved to remove the card in the correct way, and then reload the film after receiving the film
FILM JAM 14
Cards, film fell into the AT buffer, take out the card in the correct way, reload the film after receiving it
MACHINE ERROR 1/2/3
There is a problem with the cutter
MACHINE ERROR 4/5
After (REAR SLACK GUIDE) problems
MACHINE ERROR 6/7/8/9
There was a problem before (FRONT SLACK GUIDE)
MACHINE ERROR 10/11
Problem with AT stop roller
MACHINE ERROR 12
Problems occurred during machine exposure
MACHINE ERROR 13
There is a problem with the device that controls the intensity of the laser
MACHINE ERROR 14, 15
There was a problem at the beginning of the exposure, the laser light reaching the film was not strong enough
MACHINE ERROR 16
There is a problem with the prism (POLYGON MIRROR) in the optical path assembly
MACHINE ERROR 17, 18, 19
There is a problem with the sensor that detects the buffer roller (SLACK ROLLER)
MACHINE ERROR 20, 21
[NextPage]
Problems with the front punch device
MACHINE ERROR 22, 23
Problems with rear punch
MACHINE ERROR 24
The rotating shaft position of the receiving box is wrong, reinstall the box
MACHINE ERROR 30
After the main power supply is turned on, the initialization of the boot cannot pass
I / F ERROR 1
If there is a problem with SCSI communication, restart the system. If such problems occur frequently and uninterrupted, contact the service provider.
SERIAL ERROR 00
The power unit detects an RS communication error and restarts the imagesetter. If such problems occur frequently and uninterrupted, contact the service provider
SERIAL ERROR 01
The INTERFACE device detects an RS communication error and restarts the imagesetter. If such problems occur frequently without interruption, contact the service provider
IMAGE ERROR
SCSI communication error restarts the system. If such problems occur frequently, please contact the service provider
I / F COM.ERROR 1/2/3
SCSI communication error restarts the system. If such problems occur frequently, please contact the service provider
I / F ERROR 2/3/4
SCSI communication error restarts the system. If such problems occur frequently, please contact the service provider
DISK CRASH
The hard disk is damaged and cannot work Contact the service provider
DISK ERROR
Hard drive error detected Contact service provider
DISK ** UNMOUNTED
The hard drive is not recognized Contact the service provider
Magnetic Board,Glass Whiteboard,Office Whiteboard,Flexible Magnetic Whiteboard
Dongguan Aoxing Audio Visual Equipment CO.,Ltd , https://www.aoxing-whiteboard.com