[ Chinese wardrobe net ] At the beginning, I was thinking that the curved cabinet is better than the push-pull fan. After careful consideration, it is better to decide to keep it flat with the push-pull fan, because the upper cabinet is usually not worn. Clothes or something else, so the latter is more practical. If the plan is finalized, it will have to look at the plate and the price. The problem that has been confused yesterday has not been understood until now. Is it good for the MDF or the particleboard? Let me analyze it below:
Raw materials and accessories for the whole wardrobe
First, the board?
The board is the main component of the overall wardrobe , and its quality directly determines the quality of the product. The wardrobe panels on the market mainly use wood-based panels, while the use of solid wood is rare. Wood-based panels are further divided into splints, particle boards (particle board), and fiberboard. Among them, fiberboard has high density, medium density and low density.
1, particle board (particle board): middle long wood fiber + fine wood fiber on both sides, pressed into a board. There are 18MM, 25MM, and so on. The expansion ratio, fire resistance, deformation resistance, and nail holding power are superior to the MDF. The high quality imported particle board meets the highest European E1 standard and the formaldehyde content is less than 0.9mg/100mg. The molecular structure is tight, the bending strength is high, and the moisture-proofing agent is added, and the nail holding ability is strong, and the specification is 2.44*1.22, which is 4.8 ft.
2. MDF (fiberboard): The powdered wood fiber is pressed at high temperature and the surface is flat. It is suitable for blister board, baking varnish board, etc. Because it is mostly broken into pieces, and the particle board has long wood fiber, more retains the characteristics of wood, so the MDF expansion rate is higher than the particle board and it is easy to deform.
MDF is also divided into low-density board, medium-density board and high-density board. Blacker merchants will use low-density board, while business will use high-density board, which has better moisture resistance.
Second, the material of the border
At present, the frame materials of all the wardrobes on the market mainly include aluminum alloy, aluminum-titanium alloy, magnesium-titanium alloy and high-quality color steel. In general, magnesium-titanium alloy and aluminum-titanium alloy have high strength, durability and firm quality to ensure the door. Up to 2.8 meters without deformation, smooth sliding. The carbon steel frame is light in weight and the appearance is painted, and the paint will be stripped or oxidized and rusted for a long time.
The pulley of the closet is divided into the upper wheel and the lower wheel. The upper wheel is the guard wheel, which is used to make the door slide smoothly when pushed in parallel. The lower wheel is divided into hidden wheels, which are made of pure nylon to carry the weight. The semi-circular progressive rolling is the center of gravity through the wheels, so the horizontal line is pushed and pulled. The bearing capacity can reach 200 kg, the wear resistance is high, and the push-pull life can reach more than 300,000 times.
At present, some brands use a set of upper wheels (hanging rails), so that the lower wheel must bear the weight and play a guiding role. The pressure is too large, it will be easily deformed after two or three months, and the service life is not high. In the case of Elyland, the upper and lower sets of wheels are used, the upper rail is guided, and the lower rail is loaded, so that the pulley can be better protected, so that the maximum load of the pulley can reach 200 kg, and the service life can be as long as 300,000 times or more.
Third, the main accessories of the wardrobe?
There are rotating clothes hanging, push-pull mirrors, lattice racks, pants racks, tie grids, etc. I don’t think it’s necessary to have a trousers rack or a tie. It’s better to add a layer of board. There is also a push-pull mirror that the designer said that our home can not be installed.
1. Trousers rack: The stacked pants will have creases, while the trousers racks will not leave creases in the trousers. It requires no less than 600mm of hanging space, so the trousers rack will usually be placed under the drawer, so Can save space.
2, pull plate: stacked woolen clothing code put together to find it will be very troublesome, if you use the pull plate can make the stacked clothes well, but it also has the disadvantage of less storage space, so customers should choose carefully .
3, each successful man will have a number of ties, these words are lined up in a non-tie box. This tie box takes up less space than a drawer, so you can arrange the position of the tie box at will by seeing the pins. Your socks, shorts, scarves and other small items have a home.
4, push-pull mirror: the wardrobe must have a face dressing mirror, the overall wardrobe design of the dressing mirror hidden in the closet, a light pull can appear, push back the dressing mirror tightly next to the cabinet board, no occupation of the wardrobe Inside space, a small mirror makes you radiant.
TIPS:
Many people think that particleboard is more environmentally friendly than MDF, but this is not the case. Currently, the plate of furniture on the market is mostly made of particleboard and MDF. Since both plates are made of wood and pulverized, they are made of adhesive. The amount of glue determines the amount of chemical composition, which is the degree of environmental protection. The reporter learned that most consumers are very concerned about which of the two types of plates is more environmentally friendly. As a result, many salespeople tend to mislead consumers when they market their products. In the interview, a furniture salesperson told reporters when introducing the product: "Our plates are all solid wood particleboards in the northeast. You see, how big the particles are, the glue used is less, and it can be the same as the MDF glued with glue. Is it more environmentally friendly than their MDF!" Is this really the case? Experts from the China Furniture Association told the reporter: "Qualified, that is, the environmental protection of the MDF and particleboard that meet the national standards is the same. There is no more environmentally friendly statement." The so-called MDF refers to the MDF. Also known as MDF. It is a kind of artificial board which is made of wood or plant fiber by mechanical separation and chemical treatment, mixed with adhesive and waterproofing agent, and then paved, formed and high temperature and high pressure. The density is relatively uniform and the mechanical properties are close to wood. An artificial plate that is more popular internationally. The difference between particleboard and MDF is that the raw material of the particleboard is not completely pulverized into fibers, but is pulverized into granules, which is generally called shavings, and then added with rubber. The MDF is completely made of wood raw materials. It is pulverized into a fiber and then added by a rubber. The density of the particleboard is similar to that of the medium-density fiberboard. However, since the particleboard is pressed by the shaving material and added to the adhesive, the density is uneven, the middle is low, and the two ends are high, so the holding force is lower than that of the medium-density fiberboard. Moreover, the surface of the MDF is relatively fine, and the flatness is higher than that of the particle board. However, particleboard is better in terms of moisture absorption and moisture resistance than medium density board, and the price is relatively low. Therefore, it can be said that qualified MDF and particleboard are only functionally different, and no one is more environmentally friendly.
The knowledge you need to know to buy a whole wardrobe:
Buying a whole wardrobe is generally more expensive than buying an ordinary wardrobe, and the complicated pricing method at the time of purchase is even more troublesome.
In fact, the valuation method of the overall structure of the panel structure is mainly divided into four parts: panel, laminate, bottom plate and other accessories. The first three are calculated in square meters, different vendors, different materials, and prices vary. The accessories include fitting mirrors, lattice racks, L-frames, pants racks, shirt racks, and TV racks, which are finally priced according to specifications. The four parts add up to the price of the entire wardrobe. The valuation method of the metal frame structure is similar to the overall wardrobe, except that the metal frame part is calculated in meters.
Be sure to pay special attention to the purchase of the overall wardrobe, pay attention to whether there are any omissions in the design drawings, pay attention to the price, pay attention to the quality... In short, do not miss every detail!
â—Environmental protection: Whether the material is environmentally friendly is related to the health of you and your family. Therefore, the cabinet board must have the national authoritative test report, in line with the national mandatory standard GB18584-2001, formaldehyde emission ≤1.5mg.L, water content in 5 Between -11; see whether it is produced by a regular brand manufacturer, whether it has passed environmental certification, health certification, it is best to choose brand products with anti-counterfeiting marks, commitment to multi-year warranty and lifetime maintenance.
â— Durable: Whether the board is strong or not determines the service life of the cabinet. The thickness of the laminate and panel should be 18mm, and the bottom plate is slightly thinner. Its service life can reach more than 15 years, of course, if you want to thicken it, but the price is definitely higher. Another key to durability is the craft. The first is the edge of the board. The edge of the machine is generally uniform, no black lines and sawtooth prints are visible, and the hand-sealed edges will have some roughness, which will hang clothes, especially expensive silk fabrics; secondly, whether the backboard is slotted for stability.
â— Beautiful: See how the overall wardrobe hides and retouches the beams in the home. This is related to the overall aesthetics of the wardrobe. The high-end wardrobe can be designed according to the specific space structure and can provide non-standard setting services.
â—Practical: Before customizing the wardrobe, you should consider the type of your clothes, and see which kind of clothing is more, and increase the space accordingly. For example, those who prefer long skirts and coats can leave a larger space for hanging long clothes; while those with more casual wear can arrange multiple shelves and stack clothes.
â— Service: Whether the installation service personnel have undergone unified formal technical training and after-sales service. All in all, to buy a whole wardrobe, we must compare, analyze, and make decisions.
â— Price: First ask the manufacturer's calculation method, such as whether it contains the price of drawers and laminates, hardware accessories (usually the area algorithm does not include the price of drawers, laminates, hardware accessories), the most popular and fair algorithm in the world. It is based on the standard materials used in actual use. It is most reasonable to pay for how many things to buy. Also need to understand the design, so as not to be deceived!?
At present, the wardrobe brands on the market are numerous, they are similar in appearance, style, cabinet structure and so on. Then, among many brands, how to choose a suitable wardrobe becomes the most concerned issue for consumers when purchasing. When doctors were diagnosed in ancient times, they used the "looking, smelling, asking, and cutting" to diagnose the condition and bypass the class. When purchasing the wardrobe, they could also learn from the four words of "see, smell, ask, and cut" of Chinese medicine.
1, hope
One must look at the thickness of the door panel. The thickness of the door panel is crucial for a wardrobe because the door is used most frequently in everyday life. The thickness of the door panel of the wardrobe in the market is generally 5% to 9%, and the thickness of the brand with good quality is 9% to 12%. For example, the door panel thickness of the German Itley wardrobe reached 12%.
Second, you must look at the border of the door. The general brand door frame is made of ordinary aluminum alloy. The good brand is made of aviation aluminum that never rusts. It is firm and straight, and more wear-resistant.
Third, we must look at the lower rail of the door. The traditional wardrobe is a recessed track that is easy to hide and difficult to clean. The shape of the track is equipped with raised wheels, which limit the thickness and material of the board, and only use particle board. Branded wardrobes, such as the German Itley wardrobe, use a track that is as convex as a train track, with a U-shaped nylon wheel that can withstand more pressure and can withstand a high-density board of 12%.
The fourth thing to look at is the thickness and material of the cabinet board. The general brand wardrobe uses about 16% of particleboard. The good brand uses a high-density MDF of 18%. The surface is embossed with melamine and is not easily deformed. The material of the board is matt surface, hemp surface, and embossed surface. The middle and high grades are embossed surface, and the edge band is also the same.
In addition, the dustproof and insect proof of the wardrobe is also an important issue. Most of the wardrobes on the market only focus on the dust and collision on both sides of the left and right sides, ignoring the bottom is the most easy to enter the gray. Because there is a certain gap between the lower wheel and the lower rail of the wardrobe, the German Itlay wardrobe produces a patented product, a dust-proof lower frame, which solves the problem of consumers and keeps the cabinet clean.
Then it depends on whether there is a national environmental protection certificate, such as a quality management system certification, a patent certificate, and so on.
2, smell
Smell, not only to listen to the sound, but more importantly to smell. With the continuous improvement of living standards, people are not only concerned with the appearance of things, but have been paying more attention to health and environmental protection. One of the most important issues is whether the amount of formaldehyde released is up to standard.
Formaldehyde, also known as formalin, is a harmful substance that has a certain impact on human health. Consumers should pay attention when purchasing, you can open the door and drawer to smell, if there is a strong irritating odor, most of the formaldehyde is too high, not suitable for purchase.
3, ask
Ask, it is to ask the professionals and sales personnel in this area about the wardrobe, shop around, and understand the wardrobe from multiple angles.
4, cut
Pay attention to the tightness of the closet and the handwork. Good quality brands have trademarks for edge banding or hardware accessories. When buying, try to open the door and drawer, push-pull mirror is flexible, and the quality of the brand is more light and smooth. The streamlined patented positioner used in the German Itley wardrobe does not wear the wheel, has better sealing performance, does not deform or slide, and functions as a protective frame.
Then look at the handwork of the edge banding. A strong brand edge banding has the brand's trademark. The thickness of the edge band is 0.4 mm, 1 mm, 1.5 mm and 2 mm. A too thin edge banding has a poor hand feel, and a thick edge banding and a gap at the edge banding are large. In general, the optimum thickness of the edge band is 1.5 mm. At the same time, edge sealing glue is also a factor that affects the overall appearance of the wardrobe.
In short, consumers should consider the quality, environmental protection, pre-sales and after-sales service and other factors when purchasing the wardrobe. According to the room type and personal use habits, the factory design is required, and finally the products that are satisfactory are purchased.
Bonnell Spring Mattress,Bonnell Sprung Mattress,Bonnell Pocket Spring Mattress,Bonnell Hotel Mattress
HESHAN HAIMA FURNITURE CO., LTD , https://www.springmattress.com