[ Chinese wardrobe net ] Drawer slide is a kind of building material that is very common but very common in home decoration. It is suitable for all kinds of cabinets such as wardrobes , TV cabinets, bedside tables, wine cabinets, cabinets, etc., small slide rails for the whole drawer. The quality can have a significant impact, bringing convenience to home life. What is the method of installing the drawer slides? Today, Xiaobian will introduce you to the drawer slide installation.
Dimensions and specifications of drawer slides
The slide rails of the drawer are fixed on a certain track for the movement of other movable parts of the drawer, with grooves or curved guide rails. The size of the drawer slides is generally 10 inches, 12 inches, 14 inches, 16 inches, 18 inches, 20 inches, 22 inches, 24 inches. You can install different sizes of slide rails according to the size of the respective drawer model.
Drawer slide installation
1. Fix the five plates of the drawer first, screw the screws, the drawer panel has the card slot, and there are two small holes in the middle for the installation handle.
2, the installation of the drawer slide rail first need to disassemble the rail, narrowly installed on the side panel of the drawer, wide installed on the cabinet, when installed, under the flat drawer side panel below the slide rail, in front of the front flat drawer side panel. Everyone needs to distinguish between before and after.
3. Install the cabinet. First screw the white plastic hole on the side panel of the cabinet, and then install the wide rail removed on the top. One slide rail is fixed with two small screws one by one, and both sides of the cabinet must be fixed. Install and fix.
Installation notes:
1. Please ensure that there is a gap of 13mm between the drawer and the cabinet.
2. Fully stretch the three-section slide rails, and have a black buckle on the reverse side of the inner rail. Press the left side to separate the inner rail.
3. Fix the outer rail and the middle rail on both sides of the drawer
4. Fix the inner rail on both sides of the cabinet
5. Lift the drawer, align the middle rail to the inner rail and slide it into the end.
Tip: After the drawer slides are installed, align the ends of the movable rails (inner rails) on both sides of the drawer side plate with the ends of the fixed rails (middle rails), then gently push them inwards, and listen. A light click indicates that the movable rail and the fixed rail portion have been linked, and the drawer slide is installed.
DELIN HAIR COSMETICS , https://www.arganshampoofactory.com