Model NO.: SZ1012
Trademark: SZ
Origin: Shanghai China
Model NO.: SZ1012
Trademark: SZ
Origin: Shanghai China
Varying sizes of dunnage air bags Specifications
Inflatable dunnage bag wholesale supplier from China recyclable inflatable dunnage bag
1. AAR & SGS verified
2. Reduce Damage Cost
3. Reusable and recyclable
4. Fast Inflate Valve
5. Accept OEM&ODM
Product Description
Inflatable dunnage bag wholesale supplier from China recyclable inflatable dunnage bag
Proper Use of the PolyWoven Inflatable Dunnage Bag:
Remember: Most damage occurs in the last 15' of the trailer!
Loading Tips:
Clean the floor of the trailer and inspect floors, walls and roof for nails or holes before loading. Remove or hammer down nails or other sharps.
Load skids tight from front to back and from side to side. Tight means touching.
Use side shifters on the fork lift to position freight in firm contact with the sidewall or other skid of freight. Also to control void size.
Alternate the void from side to side to balance the load.
Put tallest freight in the nose at the first load position and bag it.
Put the most fragile freight towards the nose for the softest ride.
Use additional bags when necessary to stabilize unsteady skids.
Always bag when dropping from two high to one high loading.
Always bag the final load position.
Techniques for Easy Installation:
Insert inflation tool into valve.
Visually locate the best void to install the bag while walking in.
Give the bag a small puff of air to give it some stiffness and bulk.
Insert bag all the way into the void before inflating. Valve should be at top if possible. One hand should be on the inflation tool and one hand should be positioning the bag.
If bagging a high load position, you may tape the bag to the top of one unit before loading the other side.
When inflating, watch the freight not the bag. 1 3 lbs psi recommended. When the freight is tight against the wall, disengage the inflator. Don't worry, the bag will not over-inflate! Installation is complete when the inflator blows back.
After inflation, screw on over-cap.
Deflation (Patented walk-away feature):
Remove over-cap, push valve in and twist one quarter turn clockwise.
You can walk-away while bag deflates!
Remove bag, inspect for damage and set aside for reuse. Varying sizes of dunnage air bags
Specifications
Inflatable dunnage bag wholesale supplier from China recyclable inflatable dunnage bag
1. AAR & SGS verified
2. Reduce Damage Cost
3. Reusable and recyclable
4. Fast Inflate Valve
5. Accept OEM&ODM
Product Description
Inflatable dunnage bag wholesale supplier from China recyclable inflatable dunnage bag
Proper Use of the PolyWoven Inflatable Dunnage Bag:
Remember: Most damage occurs in the last 15' of the trailer!
Loading Tips:
Clean the floor of the trailer and inspect floors, walls and roof for nails or holes before loading. Remove or hammer down nails or other sharps.
Load skids tight from front to back and from side to side. Tight means touching.
Use side shifters on the fork lift to position freight in firm contact with the sidewall or other skid of freight. Also to control void size.
Alternate the void from side to side to balance the load.
Put tallest freight in the nose at the first load position and bag it.
Put the most fragile freight towards the nose for the softest ride.
Use additional bags when necessary to stabilize unsteady skids.
Always bag when dropping from two high to one high loading.
Always bag the final load position.
Techniques for Easy Installation:
Insert inflation tool into valve.
Visually locate the best void to install the bag while walking in.
Give the bag a small puff of air to give it some stiffness and bulk.
Insert bag all the way into the void before inflating. Valve should be at top if possible. One hand should be on the inflation tool and one hand should be positioning the bag.
If bagging a high load position, you may tape the bag to the top of one unit before loading the other side.
When inflating, watch the freight not the bag. 1 3 lbs psi recommended. When the freight is tight against the wall, disengage the inflator. Don't worry, the bag will not over-inflate! Installation is complete when the inflator blows back.
After inflation, screw on over-cap.
Deflation (Patented walk-away feature):
Remove over-cap, push valve in and twist one quarter turn clockwise.
You can walk-away while bag deflates!
Remove bag, inspect for damage and set aside for reuse.
JX BBQ Company with over 10 years BBQ field experiences, we are committed to researching, testing, and recommending the best products. Here comes the popular Electric Grills, the fully electric system gives you high-quality grilling with no charcoal, no propane, and no flare-ups. Durable non-stick cooking grill grates easy for clean and removable stand cook as a Tabletop Electric Grill.
Foldable Electric Grill,Outdoor Electric Barbecue Grill,Trolley Electric Grill,Electric Grill
Dongguan Jiangxin Metal Products Co., Ltd , https://www.jiangxinbbq.com