At present, the floor is divided into four types of flooring: solid wood, solid wood composite, reinforced composite and bamboo, while wood and composite have different classifications. When consumers enter the building materials store, they will be plagued by hundreds of different types of floors. The sales staff will make every effort to promote the quality, price and service, and the publicity will make the majority of consumers feel at a loss. . Therefore, it is necessary to sort out the type of flooring, regardless of popularity, to choose the product that suits you.
4 types of floor price
Solid wood flooring is more expensive
Solid wood flooring is roughly divided into hardwood floors and cork flooring. The hardwood floor has the texture hard, fine texture, good wear resistance, elasticity, dryness, cleanliness, beautiful appearance, etc. The wood used is ash, birch, walnut, eucalyptus, sea eucalyptus and eucalyptus, etc. Some wood floors use cherry wood, longan wood, camphor, etc.; and cork flooring is mainly pine, fir, cedar, hemlock, etc. snow, cypress, warm, elastic. However, the wear resistance is poor, and if it is not dry enough, it is more likely to be deformed and cracked.
In general, although the solid wood flooring has the advantages of good foot feel, natural texture, good thermal insulation, etc., the hardness is slightly poor.
Large price difference of solid wood composite flooring
The parquet is divided into the following three types: three-layer solid wood composite flooring, which is made of three different kinds of wood. The surface layer is made of hardwood such as beech, birch, elm, cherry, and ash. The middle layer and the bottom layer are used. Soft wood, such as the core board with pine wood, the elasticity of the solid wood floor, and relatively reduced the cost.
The multi-layer solid wood composite floor is made of multi-layer plywood, and the surface layer is set with hardwood veneer, which is laminated by urea-formaldehyde resin.
The new solid wood composite floor has the same surface as the first type of hard wood. The middle layer and the bottom layer use medium density fiberboard or high density fiberboard, and the effect and durability are similar to those of the three-layer solid wood floor.
The floor wear resistance is between the laminate floor and the solid wood floor, and the hardness is lower than the laminate flooring and solid wood flooring.
The most affordable flooring price
The reinforced laminate flooring is composed of three layers of materials, the middle layer is density fiberboard, which has strong impact resistance and is not easy to be deformed; the bottom layer is a balance layer and acts as a moisture barrier; the surface layer is covered with a melamine wear layer on the printed decorative layer, and the abrasion resistance is far. Higher than wood, it has good flame retardancy and is anti-corrosive, moisture-proof and anti-mite.
Compared with the above two types of flooring, the surface of the laminate flooring can be printed with various wood grain and beautiful appearance. The paving is quick and easy, saving wood. But the elasticity is worse than solid wood flooring, and its biggest advantage is that the price is the cheapest.
Metal frame mirror,home mirror,aluminum alloy mirror, iron mirror, stainless steel mirror, metal decorative mirror
Xingtai Wosen Mirror Industry Co., Ltd , https://www.wosenmirror.com